How to load LUKS passphrase from USB, falling back to keyboard?

Question

I want to set up a headless Linux (Debian Wheezy) PC with whole disk encryption, with the ability to unlock the disk either with a USB drive, or by entering a passphrase by keyb

Answer 1

A lot of my solution is derived from the post, Using A USB Key For The LUKS Passphrase.

1. Create a random passphrase:

   dd if=/dev/urandom bs=1 count=256 > passphrase
   

2. Insert a USB drive. dmesg output will show the device name; assume /dev/sdd. Figure out its size:

   blockdev --getsize64 /dev/sdd
   

3. I decided to install the passphrase at the end of the raw device, figuring it might survive any accidental use of the USB drive.

   dd if=passphrase of=/dev/sdd bs=1 seek=
   

4. Add the passphrase to the LUKS volume:

   cryptsetup luksAddKey /dev/sda5 passphrase
   

   This does not affect the existing hand-entered passphrase from the installer. The passphrase file can be deleted:

   rm passphrase
   

5. Find a unique name for the USB stick, so we can identify it when present:

   ls -l /dev/disk/by-id | grep -w sdd
   

   You should see one symlink. I will call it /dev/disk/by-id/.

6. Edit /etc/crypttab. You should see a line like:

   sdc5_crypt UUID=b9570e0f-3bd3-40b0-801f-ee20ac460207 none luks
   

   Modify it to:

   sdc5_crypt UUID=b9570e0f-3bd3-40b0-801f-ee20ac460207 /dev/disk/by-id/ luks,keyscript=/bin/passphrase-from-usb
   

7. The keyscript referred to above will need to read the passphrase from the USB device. However, it needs to do more than that. To understand how it is used, check /usr/share/initramfs-tools/scripts/local-top/cryptroot, the script that runs at boot time to unlock the root device. Note when a keyscript is set, it is simply run and the output piped to luksOpen with no other checking. There is no way to signal an error (USB drive not present) or fall back to keyboard input. If the passphrase fails, the keyscript is run again in a loop, up to some number of times; however we are not told which iteration we are on. Also, we have no control over when the keyscript is run, so we can't be sure Linux has recognized the USB drive.

   I addressed this with some hacks:

   1. Poll on the USB drive and wait 3 seconds for it to appear. This works for me, but I would love to know a better way.

   2. Create a dummy file /passphrase-from-usb-tried on first run to indicate that we have been run at least once.

   3. If we have been run at least once, or the USB drive cannot be found, run the askpass program used by cryptroot for keyboard input.

   The final script:

   #!/bin/sh
   
   set -e
   
   if ! [ -e /passphrase-from-usb-tried ]; then
       touch /passphrase-from-usb-tried
       if ! [ -e "$CRYPTTAB_KEY" ]; then
           echo "Waiting for USB stick to be recognized..." >&2
           sleep 3
       fi
       if [ -e "$CRYPTTAB_KEY" ]; then
           echo "Unlocking the disk $CRYPTTAB_SOURCE ($CRYPTTAB_NAME) from USB key" >&2
           dd if="$CRYPTTAB_KEY" bs=1 skip=129498880 count=256 2>/dev/null
           exit
       else
           echo "Can't find $CRYPTTAB_KEY; USB stick not present?" >&2
       fi
   fi
   
   /lib/cryptsetup/askpass "Unlocking the disk $CRYPTTAB_SOURCE ($CRYPTTAB_NAME)\nEnter passphrase: "
   

   Finally, we need to ensure that this script is available in the initramfs. Create /etc/initramfs-tools/hooks/passphrase-from-usb containing:

   #!/bin/sh
   
   PREREQ=""
   
   prereqs() {
           echo "$PREREQ"
   }
   
   case "$1" in
           prereqs)
                   prereqs
                   exit 0
           ;;
   esac
   
   . "${CONFDIR}/initramfs.conf"
   . /usr/share/initramfs-tools/hook-functions
   
   copy_exec /bin/passphrase-from-usb /bin
   

8. The USB drivers were not present in my initramfs. (It appears they are by default in later versions of Debian.) I had to add them by adding to /etc/initramfs-tools/modules:

   uhci_hcd
   ehci_hcd
   usb_storage
   

9. When all is done, update the initramfs:

   update-initramfs -u