How the clients (client sockets) are identified?

Question

To my understanding by serverSocket = new ServerSocket(portNumber) we create an object which potentially can \"listen\" to the indicated port. By clientSo

Answer 1

By definition, this is not a Java related question, but about networking in general, since Sockets and SeverSockets apply to any networking-enabled programming language.

A Socket is bounded to a local-port. The client will open a connection to the server (by the Operating System/drivers/adapters/hardware/line/.../line/hardware/adapters/drivers/Server OS). This "connection" is done by a protocol, called the IP (Internet Protocol) when you are connected to the Internet. When you use "Sockets", it will use another protocol, which is the TCP/IP-protocol.

The Internet Protocol will identify nodes on a network by two things: their IP-address and their port. The TCP/IP-protocol will send messages using the IP, and making sure messages are correctly received.

Now; to answer your question: it all depends! It depends on your drivers, your adapters, your hardware, your line. When you connect to your localhost machine, you will not get further than the adapter. The hardware isn't necessairy, since no data is actually sent over the line. (Though often you need hardware before you can have an adapter.)

By definition, the Internet Protocol defines a connection as pair of nodes (thus four things: two IP-adresses and two ports). Also, the Internet Protocol defines that one node can only use one port at a time to initiate a connection with another node (note: this only applies for the client, not the server).

To answer your second question: if there are two Sockets: the "new" and the "old". Since, by the Internet Protocol, a connection is a pair of nodes, and nodes can only use one port at a time for a connection, the ports of "new" and "old" must be different. And because this is different, the "new" client can be discriminated from the "old", since the port-number is differently.