socat: tunnel IP through TTY

Question

Is it possible to get an bidirectional IP-tunnel over ttyS0-like serial (modem) devices with the socat utility? I tried to use TUN option but still can\'t g

Answer 1

Ha-ha, I works but there needs to be some magic :)

So, configure the 1st peer with:

PC1:
1) slattach -L -s 57600 -p slip /dev/ttyUSB0 &
2) ifconfig sl0 up
3) socat TUN:192.168.1.1/24,up INTERFACE:sl0 &

... and something like that on the 2nd peer:

PC2:
1) slattach -L -s 57600 -p slip /dev/ttyUSB0 &
2) ifconfig sl0 up
3) socat TUN:192.168.1.2/24,up INTERFACE:sl0 &

And now, you can successfully ping one PC from another:

PC1:
1) ping -c 5 192.168.1.2

PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from 192.168.1.2: icmp_req=1 ttl=64 time=348 ms
64 bytes from 192.168.1.2: icmp_req=2 ttl=64 time=551 ms
64 bytes from 192.168.1.2: icmp_req=3 ttl=64 time=557 ms
64 bytes from 192.168.1.2: icmp_req=4 ttl=64 time=549 ms
64 bytes from 192.168.1.2: icmp_req=5 ttl=64 time=348 ms

--- 192.168.1.2 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4003ms
rtt min/avg/max/mdev = 348.116/471.143/557.128/100.177 ms

It's a little bit tricky because of slattach use but in fact any other solution must use something like slip to organize framing over the serial line. For example, PPP use HDLC-like frames.