Pitch recognition of musical notes on a smart phone

Question

With limited resources such as slower CPUs, code size and RAM, how best to detect the pitch of a musical note, similar to what an electronic or software tuner would do?

Answer 1

If you want to do pitch recognition in realtime (and accurate to within 1/100 of a semi-tone), your only real hope is the zero-crossing approach. And it's a faint hope, sorry to say. Zero-crossing can estimate pitch from just a couple of wavelengths of data, and it can be done with a smartphone's processing power, but it's not especially accurate, as tiny errors in measuring the wavelengths result in large errors in the estimated frequency. Devices like guitar synthesizers (which deduce the pitch from a guitar string with just a couple of wavelengths) work by quantizing the measurements to notes of the scale. This may work for your purposes, but be aware that zero-crossing works great with simple waveforms, but tends to work less and less well with more complex instrument sounds.

In my application (a software synthesizer that runs on smartphones) I use recordings of single instrument notes as the raw material for wavetable synthesis, and in order to produce notes at a particular pitch, I need to know the fundamental pitch of a recording, accurate to within 1/1000 of a semi-tone (I really only need 1/100 accuracy, but I'm OCD about this). The zero-crossing approach is much too inaccurate for this, and FFT-based approaches are either way too inaccurate or way too slow (or both sometimes).

The best approach that I've found in this case is to use autocorrelation. With autocorrelation you basically guess the pitch and then measure the autocorrelation of your sample at that corresponding wavelength. By scanning through the range of plausible pitches (say A = 55 Hz thru A = 880 Hz) by semi-tones, I locate the most-correlated pitch, then do a more finely-grained scan in the neighborhood of that pitch to get a more accurate value.

The approach best for you depends entirely on what you're trying to use this for.