Python: list of lists

Question

Running the code

listoflists = []
list = []
for i in range(0,10):
    list.append(i)
    if len(list)>3:
        list.remove(list[0])
        listoflists.         


        

Answer 1

Time traveller here

List_of_list =[([z for z in range(x-2,x+1) if z >= 0],y) for y in range(10) for x in range(10)]

This should do the trick. And the output is this:

[([0], 0), ([0, 1], 0), ([0, 1, 2], 0), ([1, 2, 3], 0), ([2, 3, 4], 0),  ([3, 4, 5], 0), ([4, 5, 6], 0), ([5, 6, 7], 0), ([6, 7, 8], 0), ([7, 8, 9], 0), ([0], 1), ([0, 1], 1), ([0, 1, 2], 1), ([1, 2, 3], 1), ([2, 3, 4], 1), ([3, 4, 5], 1), ([4, 5, 6], 1), ([5, 6, 7], 1), ([6, 7, 8], 1), ([7, 8, 9], 1), ([0], 2), ([0, 1], 2), ([0, 1, 2], 2), ([1, 2, 3], 2), ([2, 3, 4], 2), ([3, 4, 5], 2), ([4, 5, 6], 2), ([5, 6, 7], 2), ([6, 7, 8], 2), ([7, 8, 9], 2), ([0], 3), ([0, 1], 3), ([0, 1, 2], 3), ([1, 2, 3], 3), ([2, 3, 4], 3), ([3, 4, 5], 3), ([4, 5, 6], 3), ([5, 6, 7], 3), ([6, 7, 8], 3), ([7, 8, 9], 3), ([0], 4), ([0, 1], 4), ([0, 1, 2], 4), ([1, 2, 3], 4), ([2, 3, 4], 4), ([3, 4, 5], 4), ([4, 5, 6], 4), ([5, 6, 7], 4), ([6, 7, 8], 4), ([7, 8, 9], 4), ([0], 5), ([0, 1], 5), ([0, 1, 2], 5), ([1, 2, 3], 5), ([2, 3, 4], 5), ([3, 4, 5], 5), ([4, 5, 6], 5), ([5, 6, 7], 5), ([6, 7, 8], 5), ([7, 8, 9], 5), ([0], 6), ([0, 1], 6), ([0, 1, 2], 6), ([1, 2, 3], 6), ([2, 3, 4], 6), ([3, 4, 5], 6), ([4, 5, 6], 6), ([5, 6, 7], 6), ([6, 7, 8], 6), ([7, 8, 9], 6), ([0], 7), ([0, 1], 7), ([0, 1, 2], 7), ([1, 2, 3], 7), ([2, 3, 4], 7), ([3, 4, 5], 7), ([4, 5, 6], 7), ([5, 6, 7], 7), ([6, 7, 8], 7), ([7, 8, 9], 7), ([0], 8), ([0, 1], 8), ([0, 1, 2], 8), ([1, 2, 3], 8), ([2, 3, 4], 8), ([3, 4, 5], 8), ([4, 5, 6], 8), ([5, 6, 7], 8), ([6, 7, 8], 8), ([7, 8, 9], 8), ([0], 9), ([0, 1], 9), ([0, 1, 2], 9), ([1, 2, 3], 9), ([2, 3, 4], 9), ([3, 4, 5], 9), ([4, 5, 6], 9), ([5, 6, 7], 9), ([6, 7, 8], 9), ([7, 8, 9], 9)]    

This is done by list comprehension(which makes looping elements in a list via one line code possible). The logic behind this one-line code is the following:

(1) for x in range(10) and for y in range(10) are employed for two independent loops inside a list

(2) (a list, y) is the general term of the loop, which is why it is placed before two for's in (1)

(3) the length of the list in (2) cannot exceed 3, and the list depends on x, so

[z for z in range(x-2,x+1)] 

is used

(4) because z starts from zero but range(x-2,x+1) starts from -2 which isn't what we want, so a conditional statement if z >= 0 is placed at the end of the list in (2)

[z for z in range(x-2,x+1) if z >= 0]