Permission denied - nginx and uwsgi socket

问题:

Well I am currently trying to get my django application served using nginx and uwsgi. I am currently using a virtual environment to which uwsgi is installed. However I am currently getting a 502 bad gateway error when attempting to access the page.

The Error I am experiencing.

2014/02/27 14:20:48 [crit] 29947#0: *20 connect() to unix:///tmp/uwsgi.sock failed (13: Permission denied) while connecting to upstream, client: 144.136.65.176, server: domainname.com.au, request: "GET /favicon.ico HTTP/1.1", upstream: "uwsgi://unix:///tmp/uwsgi.sock:", host: "www.domainname.com.au" 

This is my nginx.conf

    # mysite_nginx.conf  # the upstream component nginx needs to connect to upstream django {     server unix:///tmp/uwsgi.sock; # for a file socket     #server 127.0.0.1:8001; # for a web port socket (we'll use this first) }  # configuration of the server server {     # the port your site will be served on     listen      80;     # the domain name it will serve for     server_name .domainname.com.au; # substitute your machine's IP address or FQDN     charset     utf-8;      # max upload size     client_max_body_size 75M;   # adjust to taste      # Django media     location /media  {         alias /home/deepc/media;  # your Django project's media files - amend as required     }      location /static {         alias /home/deepc/static; # your Django project's static files - amend as required     }      # Finally, send all non-media requests to the Django server.     location / {         uwsgi_pass  django;         include     /home/deepc/.virtualenvs/dcwebproj/dcweb/uwsgi_params; # the uwsgi_params file you installed     } } 

Here is my uwsgi.ini file

[uwsgi] socket=/tmp/uwsgi.sock chmod-socket=644 uid = www-data gid = www-data  chdir=/home/deepc/.virtualenvs/dcwebproj/dcweb module=dcweb.wsgi:application pidfile=/home/deepc/.virtualenvs/dcwebproj/dcweb.pid vacuum=true 

From what i have read on google its a permissions problem with the www-data group and /tmp/ directory. However I am new to this and have tried to changer the permission level of the folder to no avail. Could someone point me in the right direction? Is this a permissions problem.

Also is it ok practice to put the sock file in tmp directory?

Thanks

回答1:

I think you just need to change your socket file to 666(664 is ok with www-data), or remove it and run uwsgi server again.

In my uwsgi.ini:

chmod-socket = 664 uid = www-data gid = www-data 

回答2:

Wow, this problem takes me almost a whole day!

I use uwsgi 2.0.14, nginx 1.10.1, django 1.10

To sum up, the most important thing is to make sure both of below two users have rwx permission to socket file:

1. the user of nginx;
2. the user of uWSGI;

So, you can check them one by one.

---

First you can check if the web server nginx has permission by refreshing the url, say http://192.168.201.210:8024/morning/, without running uwsgi. If you see /var/log/nginx/error.log No such file or directory, like this:

2016/10/14 16:53:49 [crit] 17099#0: *19 connect() to unix:///usr/share/nginx/html/test/helloworld.sock failed (2: No such file or directory) while connecting to upstream, client: 192.168.201.140, server: belter-tuesday.com, request: "GET /morning/ HTTP/1.1", upstream: "uwsgi://unix:///usr/share/nginx/html/test/helloworld.sock:", host: "192.168.201.210:8024" 

Just create a file named helloworld.sock, and refresh the url and check log file again, if you see Permission denied in log file, like this:

2016/10/14 17:00:45 [crit] 17099#0: *22 connect() to unix:///usr/share/nginx/html/test/helloworld.sock failed (13: Permission denied) while connecting to upstream, client: 192.168.201.140, server: belter-tuesday.com, request: "GET /morning/ HTTP/1.1", upstream: "uwsgi://unix:///usr/share/nginx/html/test/helloworld.sock:", host: "192.168.201.210:8024" 

It means web server nginx does not have all permission to read, write and execute. So you can grant permission to this file:

sudo chmod 0777 helloworld.sock

Then, refresh the url and check log file again, if you see Connection refused in log file, like this:

2016/10/14 17:09:28 [error] 17099#0: *25 connect() to unix:///usr/share/nginx/html/test/helloworld.sock failed (111: Connection refused) while connecting to upstream, client: 192.168.201.140, server: belter-tuesday.com, request: "GET /morning/ HTTP/1.1", upstream: "uwsgi://unix:///usr/share/nginx/html/test/helloworld.sock:", host: "192.168.201.210:8024" 

This is a good sign, it means your web server nginx has the permission to use helloworld.sock file from now on.

---

Next to run uwsgi and check if the user of uwsgi has permission to use helloworld.sock. Firstly, remove the file helloworld.sock we have created before.

Run uwsgi: uwsgi --socket /usr/share/nginx/html/test/helloworld.sock --wsgi-file wsgi.py

If you see bind(): Permission denied [core/socket.c line 230], it means uwsgi don't have permission to bind helloworld.sock. This is the problem of the directory test, the parent directory of helloworld.sock.

sudo chmod 0777 test/ 

Now, you can run uwsgi successful.

But maybe you still see 502 Bad Gateway, it's terrible, I have seen it all day. If you check error.log file again, you will see this again:

2016/10/14 17:33:00 [crit] 17099#0: *28 connect() to unix:///usr/share/nginx/html/test/helloworld.sock failed (13: Permission denied) while connecting to upstream, client: 192.168.201.140, server: belter-tuesday.com, request: "GET /morning/ HTTP/1.1", upstream: "uwsgi://unix:///usr/share/nginx/html/test/helloworld.sock:", host: "192.168.201.210:8024" 

What's wrong???

Check the detail of helloworld.sock file, you can see:

srwxr-xr-x. 1 belter mslab       0 Oct 14 17:32 helloworld.sock 

uWSGI gives this file 755 permission automatically.

You can change it by adding --chmod-socket:

uwsgi --socket /usr/share/nginx/html/test/helloworld.sock --wsgi-file wsgi.py --chmod-socket=777 

OK! Finally, you can see:

---

Take away message:

1. uwsgi_params file's location is not important;
2. Since my nginx user and uwsgi user not same and even not at the same group, so I need to give 777 permission to helloworld.sock and its parent dir test/;
3. If you put helloworld.sock file in your home directory, you'll always get Permission denied.
4. There are two places you need to set the socket file path, one in nginx conf file, for me it is helloworld_nginx.conf; one when you run uwsgi.
5. Check SELinux

This is my helloworld_nginx.conf file:

# helloworld_nginx.conf upstream django {     server unix:///usr/share/nginx/html/test/helloworld.sock; # for a file socket     # server 127.0.0.1:5902; # for a web port socket (we'll use this first) }  # configuration of the server server {     # the port your site will be served on     listen      8024;     # the domain name it will serve for     server_name .belter-tuesday.com; # substitute your machine's IP address or FQDN     charset     utf-8;      # max upload size     client_max_body_size 75M;   # adjust to taste      # Finally, send all non-media requests to the Django server.     location /morning {         include     uwsgi_params;         uwsgi_pass  django;     } } 

回答3:

On CentOS, I tried all those things but still it did not work. Finally, I found this article:

https://www.nginx.com/blog/nginx-se-linux-changes-upgrading-rhel-6-6/

For a development machine, we simply run:

semanage permissive -a httpd_t 

But for a real production server, I have not figured out. You may need to try other things described in the above article.

回答4:

This issue made me crazy. My environment is centos7+nginx+uwsgi, using unix socket connection. The accepted answer is awesome, just add some points in there.

ROOT USER, QUICK TEST

First, turn off selinux, then change chmod-socket to 666, and finally start uwsgi using root.

Like this

setenforce 0 #turn off selinux chmod-socket = 666 uwsgi --ini uwsgi.ini 

OTHER USER

If you use the other user you created to start uwsgi, make sure that the permissions of the user folder under the home folder are 755, and that the owner and the group are corresponding.

For example

chmod-socket = 666 usermod -a -G nginx webuser #add webuser to nginx's group cd /home/ chmod -R 755 webuser chown -R webuser:webuser webuser uwsgi --ini uwsgi.ini --gid webuser --uid webuser 

回答5:

uwsgi.ini

[uwsgi] uid = yourusername gid = www-data chmod-socket = 664 

Why? Because sometimes the app needs to read or write to the file system beyond what's accessible to the web server. I don't want to change a whole bunch of ownership and permissions just to accommodate each such situation. I'd rather have my application run as me and do what it needs to do. Setting the group as www-data and chmoding the socket to 664 allows for that group to write to it, thus providing the only necessary window of communication between the web server and the app.

回答6:

I grappled with this problem for a while, and found that the uid and gid flags from my uwsgi.ini file were not being applied to the .sock file

You can test this by running uwsgi, then checking the permissions on your .sock file using the linux command ls -l.

The solution for me was to run uwsgi with sudo:

sudo uwsgi --ini mysite_uwsgi.ini 

with the .ini file containing the flags:

chmod-socket = 664 uid = www-data gid = www-data 

Then the permissions on the .sock file were correct, and the 502 Bad Gateway error finally vanished!

Hope this helps :)

回答7:

This is take me a lot of time to find the problem with permissions. And the problem is with permissions of course. Default user is nginx. What i did: in /etc/nginx/nginx.conf change user:

user  www-data; 

Next join your user to www-data goup:

usermod -a -G www-data yourusername 

Next set uwsgi:

[uwsgi] uid = yourusername gid = www-data chmod-socket = 660 

And then restart nginx:

sudo systemctl restart nginx 

And finaly restart uwsgi.

回答8:

you need to uncomment

#server 127.0.0.1:8001; 

from upstream block and similarly do the changes in uwsgi.ini as

socket = 127.0.0.1:8001 

文章来源: Permission denied - nginx and uwsgi socket