Selenium Error - The HTTP request to the remote WebDriver timed out after 60 seconds

I've been using Selenium for a number of months, which we're using to automate some of our internal testing processes. The scripts have been passing fine. I've recently upgraded to C# 2.40.0 webdriver using FF 27.01 and our scripts are now failing in random places with the following error.

[Portal.SmokeTest.SmokeRunTest.Booking] TearDown method failed. OpenQA.Selenium.WebDriverException : The HTTP request to the remote WebDriver server for URL htt(p)://localhost:7055/hub/session/56e99e88-ba17-4d12-bef1-c6a6367ccc2f/element timed out after 60 seconds.
  ----> System.Net.WebException : The operation has timed out
TearDown : OpenQA.Selenium.WebDriverException : The HTTP request to the remote WebDriver server for URL htt(p)://localhost:7055/hub/session/56e99e88-ba17-4d12-bef1-c6a6367ccc2f/window timed out after 60 seconds.
  ----> System.Net.WebException : The operation has timed out
[09:01:20]
[Portal.SmokeTest.SmokeRunTest.Booking] TearDown method failed. OpenQA.Selenium.WebDriverException : The HTTP request to the remote WebDriver server for URL htt(p)://localhost:7055/hub/session/56e99e88-ba17-4d12-bef1-c6a6367ccc2f/element timed out after 60 seconds.
  ----> System.Net.WebException : The operation has timed out
TearDown : OpenQA.Selenium.WebDriverException : The HTTP request to the remote WebDriver server for URL htt(p)://localhost:7055/hub/session/56e99e88-ba17-4d12-bef1-c6a6367ccc2f/window timed out after 60 seconds.
  ----> System.Net.WebException : The operation has timed out
   at OpenQA.Selenium.Support.UI.DefaultWait`1.PropagateExceptionIfNotIgnored(Exception e)
   at OpenQA.Selenium.Support.UI.DefaultWait`1.Until[TResult](Func`2 condition)
   at Portal.Test.Helpers.Process_Bookings.OpenBookings.SelectBooking(String bookingnumber)
   at Portal.SmokeTest.SmokeRunTest.Booking() in d:\TeamCityAgent\work\dac1dcea7f2e80df\SmokeTests\SmokeRunTest.cs:line 68
--WebException
   at System.Net.HttpWebRequest.GetResponse()
   at OpenQA.Selenium.Remote.HttpCommandExecutor.CreateResponse(WebRequest request)
--TearDown
   at OpenQA.Selenium.Remote.HttpCommandExecutor.CreateResponse(WebRequest request)
   at OpenQA.Selenium.Remote.HttpCommandExecutor.Execute(Command commandToExecute)
   at OpenQA.Selenium.Firefox.Internal.ExtensionConnection.Execute(Command commandToExecute)
   at OpenQA.Selenium.Remote.RemoteWebDriver.Execute(String driverCommandToExecute, Dictionary`2 parameters)
   at OpenQA.Selenium.Remote.RemoteWebDriver.Close()
   at Portal.Test.Helpers.Setup.CloseWebdriver()
   at Portal.SmokeTest.SmokeRunTest.TearDown() in d:\TeamCityAgent\work\dac1dcea7f2e80df\SmokeTests\SmokeRunTest.cs:line 162
--WebException
   at System.Net.HttpWebRequest.GetResponse()
   at OpenQA.Selenium.Remote.HttpCommandExecutor.CreateResponse(WebRequest request)

The latest error I've managed to track down to one single line of code:

_setup.driver.FindElement(By.XPath("//button[@class='buttonSmall lockBookingButton']")).Click();

The annoying thing is, trying to fix the problem is proving difficult, as if I run the test on my local machine, in debug it passes. Additionally, if I run it via the NUNIT runner on the build machine I'm running the test off, it also passes. It only seems to fail as part of our automated build running process when using Teamcity. Like I said, this has been running fine for months previously, and the only thing that has changed is the selenium webdriver kit.

I have experienced this problem before, whilst in debug, and when a Click() line of code was called, Firefox appeared to lock up, and only stopping the test would allow Firefox to continue. There are a number of suggestions on here including modifying the webdriver source? I'd like to not go down that route if possible if anyone else can offer any suggestions.

user2298124

new FirefoxDriver(new FirefoxBinary(),new FirefoxProfile(),TimeSpan.FromSeconds(180));

Launch your browser using the above lines of code. It worked for me.

I had a similar issue using the Chrome driver (v2.23) / running the tests thru TeamCity. I was able to fix the issue by adding the "no-sandbox" flag to the Chrome options:

var options = new ChromeOptions();
options.AddArgument("no-sandbox");

I'm not sure if there is a similar option for the FF driver. From what I understand the issue has something to do with TeamCity running Selenium under the SYSTEM account.

I first encountered this issue months ago (also on the click() command), and it has been an issue for me ever since. It seems to be some sort of problem with the .NET Selenium bindings. This blog post by the guy that works on the IE driver is helpful in explaining what's happening:

http://jimevansmusic.blogspot.com/2012/11/net-bindings-whaddaymean-no-response.html

Unfortunately, there doesn't seem to be a real solution to this problem. Whenever this issue has been raised to the Selenium developers (see here), this is a typical response:

We need a reproducible scenario, that must include a sample page or a link to a public site's page where the issue can be reproduced.

If you are able to submit a consistently reproducible test case, that could be very helpful in putting this bug to rest for good.

That said, perhaps you can try this workaround in the meantime. If the HTML button that you are trying to click() has an onclick attribute which contains Javascript, consider using a JavascriptExecutor to execute that code directly, rather than calling the click() command. I found that executing the onclick Javascript directly allows some of my tests to pass.

In my case, my button's type is submit not button and I change the Click to Sumbit then every work good. Something like below,

from driver.FindElement(By.Id("btnLogin")).Click();

to driver.FindElement(By.Id("btnLogin")).Submit();

BTW, I have been tried all the answer in this post but not work for me.

bewu

Got similar issue. Try to set more time in driver's constructor - add eg.

var timespan = TimeSpan.FromMinutes(3);

var driver = new FirefoxDriver(binary, profile, timeSpan);

ribbo

I think this problem occurs when you try to access your web driver object after

1) a window has closed and you haven't yet switched to the parent

2) you switched to a window that wasn't quite ready and has been updated since you switched

waiting for the windowhandles.count to be what you're expecting doesn't take into account the page content nor does document.ready. I'm still searching for a solution to this problem

In my case, it's because I deleted the chrome update folder. After chrome reinstall, it's working fine.

The problem is that the evaluation of Click() times out on your build env.. you might want to dig into what happens on Click().

Also, try adding Retrys for the Click() because occssionally the evaluations take longer time depending on network speeds, etc

In my case I found this error happening in our teams build server. The tests worked on our local dev machines.

The problem was that the target website was not configured correctly on the build server, so it couldn't open the browser correctly.

We were using the chrome driver but I'm not sure that makes a difference.

changing the Selenium.WebDriver.ChromeDriver from 2.40.0 to 2.27.0 is ok for me

In my case the issue was with SendKeys() and Remote Desktop. Posting the workaround I have so far:

I had a Selenium test which would fail when run as part of a Jenkins job on a node hosted in vSphere and administered through RDP. After some troubleshooting it turned out it succeeds if Remote Desktop is connected and focused but fails with the exception if Remote Desktop is disconnected or even minimized.

As a workaround, I logged through vSphere Console instead of RDP and then even after closing vSphere the test didn't fail anymore. This is a workaround but I would have to be careful never to login through RDP and always to administer only through vSphere Console.

The new FirefoxDriver(binary, profile, timeSpan) has been obsolete.

You can now use new FirefoxDriver(FirefoxDriverService.CreateDefaultService(), FirefoxOptions options, TimeSpan commandTimeout) instead.

There is also a new FirefoxDriver(string geckoDriverDirectory, FirefoxOptions options, TimeSpan commandTimeout) and it does works. But it's undocumented, and you need to manually specify geckoDriverDirectory even though it's already in Path.

We had the same problem. In our case, the browser was blocked by a login popup (Windows authentication), so not returning after 60 seconds. Adding correct access rights to the Windows account Chrome was running under solved the problem.

For ChromDriver the below worked for me:

string chromeDriverDirectory = "C:\\temp\\2.37";
 var options = new ChromeOptions();
 options.AddArgument("-no-sandbox");
 driver = new ChromeDriver(chromeDriverDirectory, options, 
 TimeSpan.FromMinutes(2));

Selenium version 3.11, ChromeDriver 2.37

来源：https://stackoverflow.com/questions/22322596/selenium-error-the-http-request-to-the-remote-webdriver-timed-out-after-60-sec

标签

selenium

selenium-webdriver

nunit

teamcity