PowerShell remoting: Controlling what edition is being targeted (PowerShell Core or Windows PowerShell); the state of cross-platform remoting

问题

This self-answered question, which focuses on Windows^[1], addresses the following aspects:

Now that there are two PowerShell editions - the legacy, Windows-only Windows PowerShell and the cross-platform PowerShell Core, both may be installed on a given Windows machine:

• How can I tell which PowerShell edition will execute remote commands, such as via Invoke-Command -ComputerName?

• How can I target a specific edition, both ad hoc and persistently, through configuration?

Note:

For an edition to be targetable via remoting on a given machine, it must be set up for remoting:

• Only Windows PowerShell is automatically set up for remoting, but only on servers running Windows Server 2012 or higher.

• As of v7, PowerShell Core doesn't come with Windows yet; if you're using the official installer, you're given the option of enabling remoting during the installation.

In any event, you can use Enable-PSRemoting to (re-)enable PowerShell remoting on demand, which:

• must be run from the respective edition.

• must be run with administrative privileges

---

[1] That is, the question focuses on WinRM-based remoting (WinRM is a Windows-specific implementation of the DTMF WSMan (WS-Management) standard).

As for cross-platform remoting with PowerShell Core:

• You can already use SSH-based remoting, on all platforms:

  • Using SSH-based remoting involves mostly the same cmdlets as WinRM-based remoting, though the parameters involved differ; most notably, you specify the target computer(s) via the -HostName parameter rather than the -ComputerName parameter.

  • Limitations (as of v7): "SSH-based remoting doesn't currently support remote endpoint configuration and Just Enough Administration (JEA)."

• For Unix-to-Windows remoting (Unix referring to Unix-like platforms such as macOS and Linux) - that is, remoting into a Windows machine from a Unix-like machine - you can alternatively use WinRM-based remoting with additional configuration:

  • On the Windows machine:

    • SSL connections must be enabled by configuring WinRM for HTTPS.
    • The user accounts to be used from the Unix-like machines must be defined as local user accounts in the local Administrators group - domain accounts won't work.

  • The Unix-like machines must use the remoting cmdlets with the -Authentication Basic -UseSsl parameters.

  • See about_Remote_Requirements

• A Unix WSMan-based implementation is being worked on in the psl-omi-provider repository, which already enables Linux machines to act as remoting targets (that is, the server component is already usable - it's not clear to me whether it can also be installed on macOS); the client component, however, is not yet production-ready as of this writing.
  Once the client client component is available, uniform WSMan-based cross-platform remoting will be possible, both between Unix-like machines (Linux, macOS) and between Unix-like machines and Windows machines.

回答1:

It is the locally specified remoting session configuration that determines what PowerShell edition, and possibly version, will be used on the remote machine:

• Ad hoc, you can use the -ConfigurationName parameter of remoting cmdlets such as Invoke-Command, New-PSSession, and Enter-PSSession to specify a session configuration explicitly.

• Persistently, via configuration, you can set the default session configuration via the $PSSessionConfigurationName preference variable (the linked help topic also dicusses other remote-session-related preference variables, namely $PSSessionApplicationName and $PSSessionOption)

On the target machine of a remoting operation, Get-PSSessionConfiguration cmdlet lists all registered session configurations that clients can use to connect to, and which you can manage with Register-PSSessionConfiguration and Unregister-PSSessionConfiguration:

• Caveat: Get-PSSessionConfiguration must be run in an elevated session (as administrator), and, due to a bug in Windows PowerShell 5.1, you may have to run the following dummy command first: $null = Get-Command Test-WSMan, so as to ensure that the wsman: drive is defined).

• Session configurations whose names are prefixed with 'microsoft.powershell' belong to Windows PowerShell.

• Prefix 'PowerShell.' refers to PowerShell Core.

$PSSessionConfigurationName defaults to 'http://schemas.microsoft.com/powershell/Microsoft.PowerShell' in both editions, which means that Windows PowerShell is by default targeted on remote machines even if you're running from PowerShell Core:

• The Microsoft.PowerShell part refers to the (64-bit) Windows PowerShell session configuration, as listed by Get-PSSessionConfiguration (in lowercase).

• The http://schemas.microsoft.com/powershell/ prefix is optional and can be omitted; note that using https: in the prefix does not work and will not automatically switch to an SSL-based transport; for the latter, explicit configuration is needed. Note that HTTPS/SSL-based remoting isn't necessary if all of your remoting happens within a Windows domain.

To target PowerShell Core on a remote machine:

• Generally, PowerShell Core session configurations are version-specific, and you have two choices:

  • Target a major PowerShell Core version - e.g., PowerShell.7 - using whatever the latest v7.x version is installed on the target machine.

    • This is preferable, because your code then doesn't require updating every time you install a patch or minor version update on the target machine.

  • Target a specific version - e.g., PowerShell.7.1.2

    • Do this only if you have multiple, side-by-side installations that share the same major version, and you explicitly need to target one of them.

  • Again, running Get-PSSessionConfiguration on the target machine, from an elevated session, tells you the names of all registered session configurations.

• To target PowerShell Core ad hoc, use -ConfigurationName PowerShell.7, for instance:

# Connect to computer $comp and make it execute $PSVersionTable 
# in PowerShell Core v7.x, which tells you what PowerShell edition 
# and version is running.
Invoke-Command -ComputerName $comp -ConfigurationName PowerShell.7 { $PSVersionTable }

• To target PowerShell Core by default, persistently, add something like the following to your $PROFILE file:

# When remoting, default to running PowerShell Core v7.x on the
# the target machines:
$PSSessionConfigurationName = 'PowerShell.7'

来源：https://stackoverflow.com/questions/58238481/powershell-remoting-controlling-what-edition-is-being-targeted-powershell-core