问题
I'm kind of new to the whole porting issue and I got to it because of the slowness in the emulator provided with the Android SDK.
I downloaded the android-x86-3.2-RC2-eeepc and android-x86-3.2-RC2-tegav2 ISO-es (from this site) and tried them on the VirtualBox but have no internet connection on the eeepc version and the tegev2 wont event start.
I tried the VirtualBoxHowTo but got nothing, on both Windows and Linux platforms. the only thing I managed to understand is that to use this on a VM you need to build it for VM.
Can anyone help me on this?
P.S.: I need the HoneyComb version (3.2) and the pc I have is a AMD 6 core on and Asus Crosshair Extreme motherboard, Windows 7 or Ubunutu 11.10. (both OS are 64bit)
回答1:
I solved the problem. This is what I do to get internet connection.
In my case, the gateway address was 192.168.0.254 and the DNS server was 192.168.0.10. I select an IP address for the VirtualBox host from the unused ones (192.168.0.250).
1) First of all, I set my VirtualBox network configuration:
Attached to: Bridged Adapter
Adapter type: PCnet-FAST III
2) After that, I start Android from VirtualBox; after boot, I open a root shell, pressing Alt+F1
3) Here, I use these commands:
ifconfig eth0 up 192.168.0.250
route add default gw 192.168.0.254 dev eth0
setprop net.dns1 192.168.0.10
4) Now, I return to Android (Alt + F7), and I can surf on internet!
Unfortunately, this process must be followed each time you start Android
In order to obtain gateway and DNS IP addresses, from Windows you can use this command
ipconfig /all
You must refer to your network card
回答2:
After some research, I found simplest way to solve this! The Key is dhcpcd and dns setting.
Config VirutalBox network card as Bridged Adapter. Adapter type: PCnet-FAST III (Maybe other type is ok, i did not test)
Start Android from VirtualBox; after boot, open a root shell by pressing Alt+F1, type following command:
dhcpcdType following command to set DNS server:
setprop net.dns1 yourDnsServerIp
finish!
回答3:
This worked for me:
attached to: NAT PCnet-Fast III
- press ctrl-f1
- type dhcpcd eth0
- type setprop net.dns1 [your DNS for your internet provider] mine is 75.75.75.75
- press ctrl-f7 to go back to GUI
回答4:
For Honeycomb, make sure Virtualbox is set to use PCNET III drivers. Then you can bring up ethernet manually. Apps like market and sync still do not work, as it seems they are looking for the WLAN interface to be up.
回答5:
In my case i had to be on a cable connection. It would not connect through wi-fi at any point. It may be a help to someone who had the same problem.
I used the following configuration in VM:
Bridged Adapter PCnet-FAST III
Then on the running emulator:
Start by pressing ctrl+f1
type: setprop net.dns1 *yourDns (something like 192.168.1.1 without the *)
(if you dont know your dns, bring up the commandline by running cmd.exe and type: ipconfig/all, scroll down to where it says DNS servers
press ctrl+f7 to go back to the emulator
Edit: It seems that you have to type "dhcpcd eth0" aswell, depending on your internet provided. I did not have to use it in 2/3 places, but it may be required.
回答6:
You don't need to port anything to run Android x86 on your computer, assuming that you're trying to run it inside VirtualBox with a host OS of Windows 7.
Make a new VM with a hard drive and about 8 MB of video RAM (see the VirtualBoxHowTo page for even more VirtualBox settings). Then, attach the eeepc ISO to the VM and boot from the CD-ROM drive by hitting F12 at the Oracle BIOS screen. Next, select "Installation" with your arrow keys and press Enter.
Walk through the process (tutorials abound), shutdown the VM, remove the ISO, and boot the virtual machine.
I just wrote several paragraphs about pitfalls with Android x86 so you might want to take a look at the blog entries. I don't know if including a link here would be considered spamming so leave a comment if you want the URL.
Sample tutorial for installing Android x86: http://brunocosta.com/blog/pt/2011/11/02/speeding-up-android-development-with-android-x86-and-virtualbox/
回答7:
Check the drivers compiled in the kernel. That must be the reason.IIRC you had to have the drivers for VirtualBox compiled in the kernel (or as a module) to get that to work. As Honeycomb was, according to Google, a mess, I wouldn't doubt that the kernel doesn't have that support. I'll try to check on that myself later today and I'll update this answer accordingly.
回答8:
In my case I had local network so my router acts as dhcp server
So in VirtualBox,
set network to bridge
PCNET Fast III (may be others work I have not tested)
to switch to console type Ctrl + F1
then on command line type
setprop net.dns1 dnsserveraddress
in my case I did
setprop net.dns1 8.8.8.8
8.8.8.8 is google dns ..
and it worked thereafter
来源：https://stackoverflow.com/questions/8227825/android-x86-porting-unable-to-make-it-work