问题
I noticed a meaningful difference between iterating through a numpy array "directly" versus iterating through via the tolist method. See timing below:
directly[i for i in np.arange(10000000)]
via tolist[i for i in np.arange(10000000).tolist()]
considering I've discovered one way to go faster. I wanted to ask what else might make it go faster?
what is fastest way to iterate through a numpy array?
回答1:
These are my timings on a slower machine
In [1034]: timeit [i for i in np.arange(10000000)]
1 loop, best of 3: 2.16 s per loop
If I generate the range directly (Py3 so this is a genertor) times are much better. Take this a baseline for a list comprehension of this size.
In [1035]: timeit [i for i in range(10000000)]
1 loop, best of 3: 1.26 s per loop
tolist converts the arange to a list first; takes a bit longer, but the iteration is still on a list
In [1036]: timeit [i for i in np.arange(10000000).tolist()]
1 loop, best of 3: 1.6 s per loop
Using list() - same time as direct iteration on the array; that suggests that the direct iteration first does this.
In [1037]: timeit [i for i in list(np.arange(10000000))]
1 loop, best of 3: 2.18 s per loop
In [1038]: timeit np.arange(10000000).tolist()
1 loop, best of 3: 927 ms per loop
same times a iterating on the .tolist
In [1039]: timeit list(np.arange(10000000))
1 loop, best of 3: 1.55 s per loop
In general if you must loop, working on a list is faster. Access to elements of a list is simpler.
Look at the elements returned by indexing.
a[0] is another numpy object; it is constructed from the values in a, but not simply a fetched value
list(a)[0] is the same type; the list is just [a[0], a[1], a[2]]]
In [1043]: a = np.arange(3)
In [1044]: type(a[0])
Out[1044]: numpy.int32
In [1045]: ll=list(a)
In [1046]: type(ll[0])
Out[1046]: numpy.int32
but tolist converts the array into a pure list, in this case, as list of ints. It does more work than list(), but does it in compiled code.
In [1047]: ll=a.tolist()
In [1048]: type(ll[0])
Out[1048]: int
In general don't use list(anarray). It rarely does anything useful, and is not as powerful as tolist().
What's the fastest way to iterate through array - None. At least not in Python; in c code there are fast ways.
a.tolist() is the fastest, vectorized way of creating a list integers from an array. It iterates, but does so in compiled code.
But what is your real goal?
回答2:
This is actually not surprising. Let's examine the methods one a time starting with the slowest.
[i for i in np.arange(10000000)]
This method asks python to reach into the numpy array (stored in the C memory scope), one element at a time, allocate a Python object in memory, and create a pointer to that object in the list. Each time you pipe between the numpy array stored in the C backend and pull it into pure python, there is an overhead cost. This method adds in that cost 10,000,000 times.
Next:
[i for i in np.arange(10000000).tolist()]
In this case, using .tolist() makes a single call to the numpy C backend and allocates all of the elements in one shot to a list. You then are using python to iterate over that list.
Finally:
list(np.arange(10000000))
This basically does the same thing as above, but it creates a list of numpy's native type objects (e.g. np.int64). Using list(np.arange(10000000)) and np.arange(10000000).tolist() should be about the same time.
So, in terms of iteration, the primary advantage of using numpy is that you don't need to iterate. Operation are applied in an vectorized fashion over the array. Iteration just slows it down. If you find yourself iterating over array elements, you should look into finding a way to restructure the algorithm you are attempting, in such a way that is uses only numpy operations (it has soooo many built-in!) or if really necessary you can use np.apply_along_axis, np.apply_over_axis, or np.vectorize.
回答3:
My test case has an numpy array
[[ 34 107]
[ 963 144]
[ 921 1187]
[ 0 1149]]
I'm going through this only once using range and enumerate
USING range
loopTimer1 = default_timer()
for l1 in range(0,4):
print(box[l1])
print("Time taken by range: ",default_timer()-loopTimer1)
Result
[ 34 107]
[963 144]
[ 921 1187]
[ 0 1149]
Time taken by range: 0.0005405639985838206
USING enumerate
loopTimer2 = default_timer()
for l2,v2 in enumerate(box):
print(box[l2])
print("Time taken by enumerate: ", default_timer() - loopTimer2)
Result
[ 34 107]
[963 144]
[ 921 1187]
[ 0 1149]
Time taken by enumerate: 0.00025605700102460105
This test case I picked enumerate will works faster
来源：https://stackoverflow.com/questions/40593444/what-is-the-quickest-way-to-iterate-through-a-numpy-array