I want to host a website on my local network. For some reason I can only access wamp in my local computer.
I have 2 computers in my network. Both computer A and computer B have wamp server installed. when I type the ip address of computer A from computer B I am able to connect to it. But when I do it the other way around it does not work! In other words when I type the ip address of computer B from computer A the browsers says: server at 192.168.0.120 is taking to long to respond.
Things that I have done in order to solve the problem on computer B: (remember I want to connect to computer B from computer A)
1) turn off the firewall
2) Uninstall wamp and reinstall it.
3) turn off the anti-virus.
4) turn off windows firewall
5) Place wamp online and after putting it online restart all services
after doing all those steps I still cannot connect to it from computer B!
I have not chaged any ini file plus I have uninstall it and install it again so why is it not possible to connect to it!? I have used wamp for the last 3 years and I have never experienced this.
Also wamp is the only web server that I have installed on this computer. I don't have IIS nor any other web server installed on my computer.
Perhaps your Apache is bounded to localhost only. Look in your apache configuration file for:
Listen 127.0.0.1:80
If you found it, replace it for:
Listen 80
Turn off your firewall for port 80 from any address. Turn off 443 if you need https (SSL) access. Open the configuration file (http.conf) and find the lines that say:
Allow from 127.0.0.1
Change them to read
Allow from all
Restart the wampserver. It will now work. Enjoy!!
1.
first of all Port 80(or what ever you are using) and 443 must be allow for both TCP and UDP packets. To do this, create 2 inbound rules for TPC and UDP on Windows Firewall for port 80 and 443. (or you can disable your whole firewall for testing but permanent solution if allow inbound rule)
2.
If you are using WAMPServer 3 See bottom of answer
For WAMPServer versions <= 2.5
You need to change the security setting on Apache to allow access from anywhere else, so edit your httpd.conf file.
Change this section from :
# onlineoffline tag - don't remove
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
Allow from ::1
Allow from localhost
To :
# onlineoffline tag - don't remove
Order Allow,Deny
Allow from all
if "Allow from all" line not work for your then use "Require all granted" then it will work for you.
WAMPServer 3 has a different method
In version 3 and > of WAMPServer there is a Virtual Hosts pre defined for localhost so dont amend the httpd.conf file at all, leave it as you found it.
Using the menus, edit the httpd-vhosts.conf file.
It should look like this :
<VirtualHost *:80>
ServerName localhost
DocumentRoot D:/wamp/www
<Directory "D:/wamp/www/">
Options +Indexes +FollowSymLinks +MultiViews
AllowOverride All
Require local
</Directory>
</VirtualHost>
Amend it to
<VirtualHost *:80>
ServerName localhost
DocumentRoot D:/wamp/www
<Directory "D:/wamp/www/">
Options +Indexes +FollowSymLinks +MultiViews
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
Note:if you are running wamp for other than port 80 then VirtualHost will be like VirtualHost *:86.(86 or port whatever you are using) instead of VirtualHost *:80
3. Dont forget to restart All Services of Wamp or Apache after making this change
go Setting -> General and change url in WordPress Address (URL) and Site Address (URL)
enter your pc name or your ip address in place of localhost
before : http://localhost/wordpress-test
after : http://your-pc-name/wordpress-test
...and that's it..you can access wordpress from any pc in your LAN...!!!
I had to uninstall my anti virus! Before uninstalling I clicked on the option where it said to disable auto-protect for 15 min. I also clicked on another option that supposibly disabled the anti-virus. That still was blocking my server! I don't understand why Norton makes it so hard to literally stop doing everything it's doing. I know I could had solve it by adding an exception to the firewall but Norton was taking care of windows firewall as well.
Wamp server share in local network
Reference Link: http://forum.aminfocraft.com/blog/view/141/wamp-server-share-in-local-netword
Edit your Apache httpd.conf:
Options FollowSymLinks
AllowOverride None
Order deny,allow
Allow from all
#Deny from all
and
#onlineoffline tag - don't remove
Order Deny,Allow
Allow from all
#Deny from all
to share mysql server:
edit wamp/alias/phpmyadmin.conf
<Directory "E:/wamp/apps/phpmyadmin3.2.0.1/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Order Deny,Allow
#Deny from all
Allow from all
I had the same issue, tried all nothing works, following works for me
Following is what i had
#onlineoffline tag - don't remove
Require local
Change to
Require all granted
Order Deny,Allow
Allow from all
I know this is an old post BUT I have been having problems getting WAMP server seen on my windows 7 pro network for days, tried all of the solutions offered (including changing windows system files) but still not working. finally in pure desperation I put everything on the system back as it was and installed WAMP Server on a different drive (E:\WAMP ) in my case. The result was it worked perfectly first time with no editing configs or messing with the system. Other users may wish to try this before reaching the 'tear your hair out stage', it certainly saved my sanity or what I have left of it I hope this helps someone Dave
I had the same problem but mine worked fine. Turn off your firewall, antivirus. Make sure your port 80 is enabled and both pcs are set to be remotely accessed. In each pc under users, add new user using the host ip address of the other pc. Restart all services. Put your wampserver online. It should connect
来源：https://stackoverflow.com/questions/8219062/cannot-access-wamp-server-on-local-network