问题
Summary
I am currently compiling the Linux kernel (kernel, modules and DTB) with some custom drivers for a custom board. Occasionally I'll compile the kernel and realize that the compatibility string in the DTB file is not what the custom driver is looking for. Right now the only way i can remedy this is modify the DTS or kernel driver so the strings match and then recompile the kernel again. Is there are way I can just edit the DTB file to update the compatibility string?
Failed Attempts
I have been able to decompile the DTB file back to a DTS file using the command:
dtc -I dtb -o <filename>.dts -<filename>.dtb
However if I modify the DTS file and recompile using the command:
dtc -I dts -o <filename>.dtb -<filename>.dts
The kernel will not load the recompiled DTB file
回答1:
Why don't you generate new dtb?
DTB(Device tree blob/binary), is hardware database which represents the hardware components of the board.
U-boot pass the board information struct to the kernel, that is derived from the header file in U-Boot.
DTB is compiled by the special compiler that produces the binary in the proper form for U-Boot and Linux to understand.
DTC (Device Tree Compiler) it translates device tree file to the machine-readable binary that U-Boot and Linux kernel can understand.
The straightforward way to use DTC.
$ dtc -O dtb -o arm_board.dtb -b 0 arm_board.dts
to get the device tree in text from the dtb.
dtc -I dtb -O dts arm_board.dtb
board.dts is binary created by the above command. -O specifies the output format. -o flag is output file. -b 0 specifies physical boot CPU.
Then do
$ make ARCH=arm arm_board.dtb
Another approach might be just use make dtbs this will call dtc. arch/arm/boot/dts/Makefile lists which DTBs should be
generated at build time
This another way to compile it. make will put that in this location of kernel tree /arch/arm/boot/dts
Have a look at this Device Tree for Dummies
来源：https://stackoverflow.com/questions/46469924/how-to-modify-kernel-dtb-file