I have an issue with a C# PayTrace Gateway. The below code was working fine until yesterday when I believe they turned off SSL3 due to the Poodle Exploit. When running the code below we got the following message. The remote server has forcefully closed the connection. After doing some research on the problem we determined that because our IIS Server 7.5 was configured to still use SSL3, C# defaulted to SSL3, which PayTrace would forcibly close the connection. We then removed SSL3 from the server. Which then lead to the following error:
The client and server cannot communicate, because they do not possess a common algorithm.
My guess is that there are additional SSL algorithm we need to install on the server now that SSL 3 is removed. Our IT staff claims that TLS 1.1 and TLS 1.2 are working and that ASP.NET should be now defaulting to those. But I feel like there still must be something else we need to install on the server, I have no knowledge of SSL Algorithms so I have no idea where to begin.
var postUrl = new StringBuilder();
//Initialize url with configuration and parameter values...
postUrl.AppendFormat("UN~{0}|", this.MerchantLoginID);
postUrl.AppendFormat("PSWD~{0}|", this.MerchantTransactionKey);
postUrl.Append("TERMS~Y|METHOD~ProcessTranx|TRANXTYPE~Sale|");
postUrl.AppendFormat("CC~{0}|", cardNumber);
postUrl.AppendFormat("EXPMNTH~{0}|", expirationMonth.PadLeft(2, '0'));
postUrl.AppendFormat("EXPYR~{0}|", expirationYear);
postUrl.AppendFormat("AMOUNT~{0}|", transactionAmount);
postUrl.AppendFormat("BADDRESS~{0}|", this.AddressLine1);
postUrl.AppendFormat("BADDRESS2~{0}|", this.AddressLine2);
postUrl.AppendFormat("BCITY~{0}|", this.City);
postUrl.AppendFormat("BSTATE~{0}|", this.State);
postUrl.AppendFormat("BZIP~{0}|", this.Zip);
postUrl.AppendFormat("SADDRESS~{0}|", this.AddressLine1);
postUrl.AppendFormat("SADDRESS2~{0}|", this.AddressLine2);
postUrl.AppendFormat("SCITY~{0}|", this.City);
postUrl.AppendFormat("SSTATE~{0}|", this.State);
postUrl.AppendFormat("SZIP~{0}|", this.Zip);
if (!String.IsNullOrEmpty(this.Country))
{
postUrl.AppendFormat("BCOUNTRY~{0}|", this.Country);
}
if (!String.IsNullOrEmpty(this.Description))
{
postUrl.AppendFormat("DESCRIPTION~{0}|", this.Description);
}
if (!String.IsNullOrEmpty(this.InvoiceNumber))
{
postUrl.AppendFormat("INVOICE~{0}|", this.InvoiceNumber);
}
if (this.IsTestMode)
{
postUrl.AppendFormat("TEST~Y|");
}
//postUrl.Append();
WebClient wClient = new WebClient();
ServicePointManager.SecurityProtocol = SecurityProtocolType.Tls;
String sRequest = "PARMLIST=" + Url.Encode(postUrl.ToString());
wClient.Headers.Add("Content-Type", "application/x-www-form-urlencoded");
string sResponse = "";
sResponse = wClient.UploadString(PayTraceUrl, sRequest);
Also, just an FYI, this issue is also happening when we connect to First Data E4 gateway so it's not just a PayTrace thing. My guess is that as more gateways turn off access to SSL3 we'll continue to run into issues with other gateways until this can be resolved on the server. Also, I did find a few suggestions online, some suggested placing the following code right before making the outbound request:
ServicePointManager.SecurityProtocol = SecurityProtocolType.Tls;
Unfortunately that did not work either, same error. Which is why I'm thinking something additional needs to be installed on the IIS7.5 server. I'm just not sure what.
There are several other posts about this now and they all point to enabling TLS 1.2. Anything less is unsafe.
You can do this in .NET 3.5 with a patch.
You can do this in .NET 4.0 and 4.5 with a single line of code
ServicePointManager.SecurityProtocol = SecurityProtocolType.Tls12; // .NET 4.5
ServicePointManager.SecurityProtocol = (SecurityProtocolType)3072; // .NET 4.0
In .NET 4.6, it automatically uses TLS 1.2.
See here for more details: .NET support for TLS
This was resolved. It turns out our IT Staff was correct. Both TLS 1.1 and TLS 1.2 were installed on the server. However, the issue was that our sites are running as ASP.NET 4.0 and you have to have ASP.NET 4.5 to run TLS 1.1 or TLS 1.2. So, to resolve the issue, our IT Staff had to reenable TLS 1.0 to allow a connection with PayTrace.
So in short, the error message, "the client and server cannot communicate, because they do not possess a common algorithm", was caused because there was no SSL Protocol available on the server to communicate with PayTrace's servers.
Enabling TLS 1.0 solved our issues as well (after disabling SSL v3). (Server 2012 R2 with ASP.net 4.0 website processing against PPI pay services). This is the RegEdit script I used to set everything the way I wanted. We only disabled SSL v3 for the Client and not the server as doing that broke other things that we were not ready to deal with yet. After we upgrade the site to .Net 4.5.2 then we will disable TLS 1.0 again.
This script enables all protocols, Server and Client except for SSL v3 for the Client.
-Eric Niemiec
(Be sure to backup your registry!!)
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
"DisabledByDefault"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
"DisabledByDefault"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client]
"DisabledByDefault"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server]
"DisabledByDefault"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client]
"DisabledByDefault"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server]
"DisabledByDefault"=dword:00000000
In a previous answer, it was suggested to use this line of code for .Net 4.5:
ServicePointManager.SecurityProtocol = SecurityProtocolType.Tls12; // .NET 4.5
I would encourage you to OR that value in to whatever the existing values are like this:
ServicePointManager.SecurityProtocol |= SecurityProtocolType.Tls12; // .NET 4.5
If you look at the list of values, you notice that they are a power of two. This way, in the future when things shift to TLS 2.0 for example, your code will still work.
In my case, even though Target Framework of Project was 4.7.1, I was still getting same Error, Solution was to change httpRuntime in web.config under system.web to 4.7.1!
After messing with this for days, my final fix for our issues required two things;
1) We added this line of code to all of our .Net libraries that make out bound api calls to other vendors that had also disabled their SSL v3.
ServicePointManager.SecurityProtocol = SecurityProtocolType.Tls; // (.Net 4 and below)
2) This is the final and FULL registry changes you will need when you are running ASP.Net 4.0 sites and will need to be slightly changed after you upgrade to ASP.Net 4.5.
After we rebooted the servers - all problems went away after this.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client]
"DisabledByDefault"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server]
"DisabledByDefault"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client]
"DisabledByDefault"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server]
"DisabledByDefault"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
"DisabledByDefault"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
"DisabledByDefault"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client]
"DisabledByDefault"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server]
"DisabledByDefault"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client]
"DisabledByDefault"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server]
"DisabledByDefault"=dword:00000000
In previous answers a few registry keys that might not exist are missed. They are SchUseStrongCrypto that must exist to allow to TLS protocols work properly.
After the registry keys have been imported to registry it should not be required to make changes in code like
ServicePointManager.SecurityProtocol = SecurityProtocolType.Tls;
Below there are all registry keys and values that are needed for x64 windows OS. If you have 32bit OS (x86) just remove the last 2 lines. TLS 1.0 will be disabled by the registry script. Restarting OS is required.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client]
"DisabledByDefault"=dword:00000001
"enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\server]
"disabledbydefault"=dword:00000001
"enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\ssl 3.0]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\ssl 3.0\client]
"disabledbydefault"=dword:00000001
"enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\ssl 3.0\server]
"disabledbydefault"=dword:00000001
"enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\tls 1.0]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\tls 1.0\client]
"disabledbydefault"=dword:00000001
"enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\tls 1.0\server]
"disabledbydefault"=dword:00000001
"enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\tls 1.1]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\tls 1.1\client]
"disabledbydefault"=dword:00000000
"enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\tls 1.1\server]
"disabledbydefault"=dword:00000000
"enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\tls 1.2]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\tls 1.2\client]
"disabledbydefault"=dword:00000000
"enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\tls 1.2\server]
"disabledbydefault"=dword:00000000
"enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v4.0.30319]
"SchUseStrongCrypto"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\.NETFramework\v4.0.30319]
"SchUseStrongCrypto"=dword:00000001
来源：https://stackoverflow.com/questions/26742054/the-client-and-server-cannot-communicate-because-they-do-not-possess-a-common-a