问题
I am trying to plot a bivariate gaussian distribution using matplotlib. I want to do this using the xy coordinates of two scatter points (Group A), (Group B).
I want to adjust the distribution by adjusting the COV matrix to account for each Groups velocity and their distance to an additional xy coordinate used as a reference point.
I've calculated the distance of each groups xy coordinate to that of the reference point. The distance is expressed as a radius, labelled [GrA_Rad],[GrB_Rad].
So the further they are away from the reference point the greater the radius. I've also calculated velocity labelled [GrA_Vel],[GrB_Vel]. The direction of each group is expressed as the orientation. This is labelled [GrA_Rotation],[GrB_Rotation]
Question on how I want the distribution to be adjusted for velocity and distance (radius):
I'm hoping to use SVD. Specifically, if I have the rotation angle of each scatter, this provides the direction. The velocity can be used to describe a scaling matrix [GrA_Scaling],[GrB_Scaling]. So this scaling matrix can be used to expand the radius in the x-direction and contract the radius in the y-direction. This expresses the COV matrix.
Finally, the distribution mean value is found by translating the groups location (x,y) by half the velocity.
Put simply: the radius is applied to each group's scatter point. The COV matrix is adjusted by the radius and velocity. So using the scaling matrix to expand the radius in x-direction and contract in y-direction. The direction is measured from the rotation angle. Then determine the distribution mean value by translating the groups location (x,y) by half the velocity.
Below is the df of these variables
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt
import matplotlib.animation as animation
d = ({
'Time' : [1,2,3,4,5,6,7,8],
'GrA_X' : [10,12,17,16,16,14,12,8],
'GrA_Y' : [10,12,13,7,6,7,8,8],
'GrB_X' : [5,8,13,16,19,15,13,5],
'GrB_Y' : [6,15,12,7,8,9,10,8],
'Reference_X' : [6,8,14,18,13,11,16,15],
'Reference_Y' : [10,12,8,12,15,12,10,8],
'GrA_Rad' : [8.3,8.25,8.2,8,8.15,8.15,8.2,8.3],
'GrB_Rad' : [8.3,8.25,8.3,8.4,8.6,8.4,8.3,8.65],
'GrA_Vel' : [0,2.8,5.1,6.1,1.0,2.2,2.2,4.0],
'GrB_Vel' : [0,9.5,5.8,5.8,3.16,4.12,2.2,8.2],
'GrA_Scaling' : [0,0.22,0.39,0.47,0.07,0.17,0.17,0.31],
'GrB_Scaling' : [0,0.53,0.2,0.2,0.06,0.1,0.03,0.4],
'GrA_Rotation' : [0,45,23.2,-26.56,-33.69,-36.86,-45,-135],
'GrB_Rotation' : [0,71.6,36.87,5.2,8.13,16.70,26.57,90],
})
df = pd.DataFrame(data = d)
I've made an animated plot of each xy coordinate.
GrA_X = [10,12,17,16,16,14,12,8]
GrA_Y = [10,12,13,7,6,7,8,8]
GrB_X = [5,8,13,16,19,15,13,5]
GrB_Y = [6,15,12,10,8,9,10,8]
Item_X = [6,8,14,18,13,11,16,15]
Item_Y = [10,12,8,12,15,12,10,8]
scatter_GrA = ax.scatter(GrA_X, GrA_Y)
scatter_GrB = ax.scatter(GrB_X, GrB_Y)
scatter_Item = ax.scatter(Item_X, Item_Y)
def animate(i) :
scatter_GrA.set_offsets([[GrA_X[0+i], GrA_Y[0+i]]])
scatter_GrB.set_offsets([[GrB_X[0+i], GrB_Y[0+i]]])
scatter_Item.set_offsets([[Item_X[0+i], Item_Y[0+i]]])
ani = animation.FuncAnimation(fig, animate, np.arange(0,9),
interval = 1000, blit = False)
回答1:
Update
The question has been updated, and has gotten somewhat clearer. I've updated my code to match. Here's the latest output:
Aside from the styling, I think this matches what the OP described.
Here's the code that was used to produce the above plot:
dfake = ({
'GrA_X' : [15,15],
'GrA_Y' : [15,15],
'Reference_X' : [15,3],
'Reference_Y' : [15,15],
'GrA_Rad' : [15,25],
'GrA_Vel' : [0,10],
'GrA_Scaling' : [0,0.5],
'GrA_Rotation' : [0,45]
})
dffake = pd.DataFrame(dfake)
fig,axs = plt.subplots(1, 2, figsize=(16,8))
fig.subplots_adjust(0,0,1,1)
plotone(dffake, 'A', 0, xlim=(0,30), ylim=(0,30), fig=fig, ax=axs[0])
plotone(dffake, 'A', 1, xlim=(0,30), ylim=(0,30), fig=fig, ax=axs[1])
plt.show()
and the complete implementation of the plotone function that I used is in the code block below. If you just want to know about the math used to generate and transform the 2D gaussian PDF, check out the mvpdf function (and the rot and getcov functions it depends on):
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt
import scipy.stats as sts
def rot(theta):
theta = np.deg2rad(theta)
return np.array([
[np.cos(theta), -np.sin(theta)],
[np.sin(theta), np.cos(theta)]
])
def getcov(radius=1, scale=1, theta=0):
cov = np.array([
[radius*(scale + 1), 0],
[0, radius/(scale + 1)]
])
r = rot(theta)
return r @ cov @ r.T
def mvpdf(x, y, xlim, ylim, radius=1, velocity=0, scale=0, theta=0):
"""Creates a grid of data that represents the PDF of a multivariate gaussian.
x, y: The center of the returned PDF
(xy)lim: The extent of the returned PDF
radius: The PDF will be dilated by this factor
scale: The PDF be stretched by a factor of (scale + 1) in the x direction, and squashed by a factor of 1/(scale + 1) in the y direction
theta: The PDF will be rotated by this many degrees
returns: X, Y, PDF. X and Y hold the coordinates of the PDF.
"""
# create the coordinate grids
X,Y = np.meshgrid(np.linspace(*xlim), np.linspace(*ylim))
# stack them into the format expected by the multivariate pdf
XY = np.stack([X, Y], 2)
# displace xy by half the velocity
x,y = rot(theta) @ (velocity/2, 0) + (x, y)
# get the covariance matrix with the appropriate transforms
cov = getcov(radius=radius, scale=scale, theta=theta)
# generate the data grid that represents the PDF
PDF = sts.multivariate_normal([x, y], cov).pdf(XY)
return X, Y, PDF
def plotmv(x, y, xlim=None, ylim=None, radius=1, velocity=0, scale=0, theta=0, xref=None, yref=None, fig=None, ax=None):
"""Plot an xy point with an appropriately tranformed 2D gaussian around it.
Also plots other related data like the reference point.
"""
if xlim is None: xlim = (x - 5, x + 5)
if ylim is None: ylim = (y - 5, y + 5)
if fig is None:
fig = plt.figure(figsize=(8,8))
ax = fig.gca()
elif ax is None:
ax = fig.gca()
# plot the xy point
ax.plot(x, y, '.', c='C0', ms=20)
if not (xref is None or yref is None):
# plot the reference point, if supplied
ax.plot(xref, yref, '.', c='w', ms=12)
# plot the arrow leading from the xy point
if velocity > 0:
ax.arrow(x, y, *rot(theta) @ (velocity, 0),
width=.4, length_includes_head=True, ec='C0', fc='C0')
# fetch the PDF of the 2D gaussian
X, Y, PDF = mvpdf(x, y, xlim=xlim, ylim=ylim, radius=radius, velocity=velocity, scale=scale, theta=theta)
# normalize PDF by shifting and scaling, so that the smallest value is 0 and the largest is 1
normPDF = PDF - PDF.min()
normPDF = normPDF/normPDF.max()
# plot and label the contour lines of the 2D gaussian
cs = ax.contour(X, Y, normPDF, levels=6, colors='w', alpha=.5)
ax.clabel(cs, fmt='%.3f', fontsize=12)
# plot the filled contours of the 2D gaussian. Set levels high for smooth contours
cfs = ax.contourf(X, Y, normPDF, levels=50, cmap='viridis', vmin=-.9, vmax=1)
# create the colorbar and ensure that it goes from 0 -> 1
cbar = fig.colorbar(cfs, ax=ax)
cbar.set_ticks([0, .2, .4, .6, .8, 1])
# add some labels
ax.grid()
ax.set_xlabel('X distance (M)')
ax.set_ylabel('Y distance (M)')
# ensure that x vs y scaling doesn't disrupt the transforms applied to the 2D gaussian
ax.set_aspect('equal', 'box')
return fig, ax
def fetchone(df, l, i, **kwargs):
"""Fetch all the needed data for one xy point
"""
keytups = (
('x', 'Gr%s_X'%l),
('y', 'Gr%s_Y'%l),
('radius', 'Gr%s_Rad'%l),
('velocity', 'Gr%s_Vel'%l),
('scale', 'Gr%s_Scaling'%l),
('theta', 'Gr%s_Rotation'%l),
('xref', 'Reference_X'),
('yref', 'Reference_Y')
)
ret = {k:df.loc[i, l] for k,l in keytups}
# add in any overrides
ret.update(kwargs)
return ret
def plotone(df, l, i, xlim=None, ylim=None, fig=None, ax=None, **kwargs):
"""Plot exactly one point from the dataset
"""
# look up all the data to plot one datapoint
xydata = fetchone(df, l, i, **kwargs)
# do the plot
return plotmv(xlim=xlim, ylim=ylim, fig=fig, ax=ax, **xydata)
Old answer -2
I've adjusted my answer to match the example the OP posted:
Here's the code that produced the above image:
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt
import scipy.stats as sts
def rot(theta):
theta = np.deg2rad(theta)
return np.array([
[np.cos(theta), -np.sin(theta)],
[np.sin(theta), np.cos(theta)]
])
def getcov(radius=1, scale=1, theta=0):
cov = np.array([
[radius*(scale + 1), 0],
[0, radius/(scale + 1)]
])
r = rot(theta)
return r @ cov @ r.T
def datalimits(*data, pad=.15):
dmin,dmax = min(d.min() for d in data), max(d.max() for d in data)
spad = pad*(dmax - dmin)
return dmin - spad, dmax + spad
d = ({
'Time' : [1,2,3,4,5,6,7,8],
'GrA_X' : [10,12,17,16,16,14,12,8],
'GrA_Y' : [10,12,13,7,6,7,8,8],
'GrB_X' : [5,8,13,16,19,15,13,5],
'GrB_Y' : [6,15,12,7,8,9,10,8],
'Reference_X' : [6,8,14,18,13,11,16,15],
'Reference_Y' : [10,12,8,12,15,12,10,8],
'GrA_Rad' : [8.3,8.25,8.2,8,8.15,8.15,8.2,8.3],
'GrB_Rad' : [8.3,8.25,8.3,8.4,8.6,8.4,8.3,8.65],
'GrA_Vel' : [0,2.8,5.1,6.1,1.0,2.2,2.2,4.0],
'GrB_Vel' : [0,9.5,5.8,5.8,3.16,4.12,2.2,8.2],
'GrA_Scaling' : [0,0.22,0.39,0.47,0.07,0.17,0.17,0.31],
'GrB_Scaling' : [0,0.53,0.2,0.2,0.06,0.1,0.03,0.4],
'GrA_Rotation' : [0,45,23.2,-26.56,-33.69,-36.86,-45,-135],
'GrB_Rotation' : [0,71.6,36.87,5.2,8.13,16.70,26.57,90],
})
df = pd.DataFrame(data=d)
limitpad = .5
clevels = 5
cflevels = 50
xmin,xmax = datalimits(df['GrA_X'], df['GrB_X'], pad=limitpad)
ymin,ymax = datalimits(df['GrA_Y'], df['GrB_Y'], pad=limitpad)
X,Y = np.meshgrid(np.linspace(xmin, xmax), np.linspace(ymin, ymax))
fig = plt.figure(figsize=(10,6))
ax = plt.gca()
Zs = []
for l,color in zip('AB', ('red', 'yellow')):
# plot all of the points from a single group
ax.plot(df['Gr%s_X'%l], df['Gr%s_Y'%l], '.', c=color, ms=15, label=l)
Zrows = []
for _,row in df.iterrows():
x,y = row['Gr%s_X'%l], row['Gr%s_Y'%l]
cov = getcov(radius=row['Gr%s_Rad'%l], scale=row['Gr%s_Scaling'%l], theta=row['Gr%s_Rotation'%l])
mnorm = sts.multivariate_normal([x, y], cov)
Z = mnorm.pdf(np.stack([X, Y], 2))
Zrows.append(Z)
Zs.append(np.sum(Zrows, axis=0))
# plot the reference points
# create Z from the difference of the sums of the 2D Gaussians from group A and group B
Z = Zs[0] - Zs[1]
# normalize Z by shifting and scaling, so that the smallest value is 0 and the largest is 1
normZ = Z - Z.min()
normZ = normZ/normZ.max()
# plot and label the contour lines
cs = ax.contour(X, Y, normZ, levels=clevels, colors='w', alpha=.5)
ax.clabel(cs, fmt='%2.1f', colors='w')#, fontsize=14)
# plot the filled contours. Set levels high for smooth contours
cfs = ax.contourf(X, Y, normZ, levels=cflevels, cmap='viridis', vmin=0, vmax=1)
# create the colorbar and ensure that it goes from 0 -> 1
cbar = fig.colorbar(cfs, ax=ax)
cbar.set_ticks([0, .2, .4, .6, .8, 1])
ax.set_aspect('equal', 'box')
Old answer -1
It's a little hard to tell exactly what you're after. It is possible to scale and rotate a multivariate gaussian distribution via its covariance matrix. Here's an example of how to do so based on your data:
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt
import scipy.stats as sts
def rot(theta):
theta = np.deg2rad(theta)
return np.array([
[np.cos(theta), -np.sin(theta)],
[np.sin(theta), np.cos(theta)]
])
def getcov(scale, theta):
cov = np.array([
[1*(scale + 1), 0],
[0, 1/(scale + 1)]
])
r = rot(theta)
return r @ cov @ r.T
d = ({
'Time' : [1,2,3,4,5,6,7,8],
'GrA_X' : [10,12,17,16,16,14,12,8],
'GrA_Y' : [10,12,13,7,6,7,8,8],
'GrB_X' : [5,8,13,16,19,15,13,5],
'GrB_Y' : [6,15,12,7,8,9,10,8],
'Reference_X' : [6,8,14,18,13,11,16,15],
'Reference_Y' : [10,12,8,12,15,12,10,8],
'GrA_Rad' : [8.3,8.25,8.2,8,8.15,8.15,8.2,8.3],
'GrB_Rad' : [8.3,8.25,8.3,8.4,8.6,8.4,8.3,8.65],
'GrA_Vel' : [0,2.8,5.1,6.1,1.0,2.2,2.2,4.0],
'GrB_Vel' : [0,9.5,5.8,5.8,3.16,4.12,2.2,8.2],
'GrA_Scaling' : [0,0.22,0.39,0.47,0.07,0.17,0.17,0.31],
'GrB_Scaling' : [0,0.53,0.2,0.2,0.06,0.1,0.03,0.4],
'GrA_Rotation' : [0,45,23.2,-26.56,-33.69,-36.86,-45,-135],
'GrB_Rotation' : [0,71.6,36.87,5.2,8.13,16.70,26.57,90],
})
df = pd.DataFrame(data=d)
xmin,xmax = min(df['GrA_X'].min(), df['GrB_X'].min()), max(df['GrA_X'].max(), df['GrB_X'].max())
ymin,ymax = min(df['GrA_Y'].min(), df['GrB_Y'].min()), max(df['GrA_Y'].max(), df['GrB_Y'].max())
X,Y = np.meshgrid(
np.linspace(xmin - (xmax - xmin)*.1, xmax + (xmax - xmin)*.1),
np.linspace(ymin - (ymax - ymin)*.1, ymax + (ymax - ymin)*.1)
)
fig,axs = plt.subplots(df.shape[0], sharex=True, figsize=(4, 4*df.shape[0]))
fig.subplots_adjust(0,0,1,1,0,-.82)
for (_,row),ax in zip(df.iterrows(), axs):
for c in 'AB':
x,y = row['Gr%s_X'%c], row['Gr%s_Y'%c]
cov = getcov(scale=row['Gr%s_Scaling'%c], theta=row['Gr%s_Rotation'%c])
mnorm = sts.multivariate_normal([x, y], cov)
Z = mnorm.pdf(np.stack([X, Y], 2))
ax.contour(X, Y, Z)
ax.plot(row['Gr%s_X'%c], row['Gr%s_Y'%c], 'x')
ax.set_aspect('equal', 'box')
This outputs:
来源：https://stackoverflow.com/questions/53368263/plot-scaled-and-rotated-bivariate-distribution-using-matplotlib