Rails shows IP as 127.0.0.1 when accessed from private NIC, but Nginx shows the correct IP. Public IP gets forwarded fine

问题

We are running a Rails application on Unicorn + Nginx. The server has two NICs that we use. eth0 handles requests for the public internet, and eth2 handles requests from our private network.

When a request comes through eth0, the nginx logs show the public IP, and the Rails logs also show this IP. However, when a request comes through eth2, the nginx logs show the private IP correctly (e.g. 192.168.5.134), but the Rails logs show 127.0.0.1.

So it seems like public requests on eth0 get their X-Forwarded-For header set correctly, but this isn't happening for requests on eth2.

Our nginx config is pretty basic:

upstream example.com {
  server unix://var/www/example.com/shared/sockets/unicorn.socket fail_timeout=0;
}

...

server {
  listen 443 ssl;
  ...

  location @example.com  {
    proxy_set_header X-Forwarded-Proto $scheme;
    proxy_set_header X-Real_IP $remote_Addr;
    proxy_set_header X-Forwarded_For $proxy_add_x_forwarded_for;
    proxy_set_header Host $http_host;
    proxy_redirect off;

    if ($host ~* "^(.+)\.example.com$") {
      set $subdomain $1;
    }

    proxy_pass http://example.com;
  }

Any ideas?

回答1:

The issue was that Rails thinks any 192.168.x.x address is a private address, so strips them from the X-Forwarded_For header.

# IP addresses that are "trusted proxies" that can be stripped from
# the comma-delimited list in the X-Forwarded-For header. See also:
# http://en.wikipedia.org/wiki/Private_network#Private_IPv4_address_spaces
TRUSTED_PROXIES = %r{
  ^127\.0\.0\.1$                | # localhost
  ^(10                          | # private IP 10.x.x.x
    172\.(1[6-9]|2[0-9]|3[0-1]) | # private IP in the range 172.16.0.0 .. 172.31.255.255
    192\.168                      # private IP 192.168.x.x
   )\.
}x

See the relevant Rails source here and here.

One solution is to add this to your config/application.rb:

config.action_dispatch.trusted_proxies = /^127\.0\.0\.1$/ # localhost

That way, IPs on your local network will not be replaced by '127.0.0.1'.

来源：https://stackoverflow.com/questions/19871264/rails-shows-ip-as-127-0-0-1-when-accessed-from-private-nic-but-nginx-shows-the

标签

ruby-on-rails

networking

nginx

unicorn