问题
I have a file. In Python, I would like to take its creation time, and convert it to an ISO time (ISO 8601) string while preserving the fact that it was created in the Eastern Time Zone (ET).
How do I take the file's ctime and convert it to an ISO time string that indicates the Eastern Time Zone (and takes into account daylight savings time, if necessary)?
回答1:
Local to ISO 8601:
import datetime
datetime.datetime.now().isoformat()
UTC to ISO 8601:
import datetime
datetime.datetime.utcnow().isoformat()
Local to ISO 8601 without microsecond:
import datetime
datetime.datetime.now().replace(microsecond=0).isoformat()
UTC to ISO 8601 with TimeZone information (Python 3):
import datetime
datetime.datetime.utcnow().replace(tzinfo=datetime.timezone.utc).isoformat()
Local to ISO 8601 with TimeZone information (Python 3):
import datetime, time
# Calculate the offset taking into account daylight saving time
utc_offset_sec = time.altzone if time.localtime().tm_isdst else time.timezone
utc_offset = datetime.timedelta(seconds=-utc_offset_sec)
datetime.datetime.now().replace(tzinfo=datetime.timezone(offset=utc_offset)).isoformat()
For Python 2, see and use pytz.
回答2:
Here is what I use to convert to the XSD datetime format:
from datetime import datetime
datetime.now().replace(microsecond=0).isoformat()
# You get your ISO string
I came across this question when looking for the XSD date time format (xs:dateTime). I needed to remove the microseconds from isoformat.
回答3:
ISO 8601 Time Representation
The international standard ISO 8601 describes a string representation for dates and times. Two simple examples of this format are
2010-12-16 17:22:15
20101216T172215
(which both stand for the 16th of December 2010), but the format also allows for sub-second resolution times and to specify time zones. This format is of course not Python-specific, but it is good for storing dates and times in a portable format. Details about this format can be found in the Markus Kuhn entry.
I recommend use of this format to store times in files.
One way to get the current time in this representation is to use strftime from the time module in the Python standard library:
>>> from time import strftime
>>> strftime("%Y-%m-%d %H:%M:%S")
'2010-03-03 21:16:45'
You can use the strptime constructor of the datetime class:
>>> from datetime import datetime
>>> datetime.strptime("2010-06-04 21:08:12", "%Y-%m-%d %H:%M:%S")
datetime.datetime(2010, 6, 4, 21, 8, 12)
The most robust is the Egenix mxDateTime module:
>>> from mx.DateTime.ISO import ParseDateTimeUTC
>>> from datetime import datetime
>>> x = ParseDateTimeUTC("2010-06-04 21:08:12")
>>> datetime.fromtimestamp(x)
datetime.datetime(2010, 3, 6, 21, 8, 12)
References
The Python time module documentation
The Python datetime class documentation
The Egenix mxDateTime class
回答4:
I found the datetime.isoformat in the documentation. It seems to do what you want:
datetime.isoformat([sep])
Return a string representing the date and time in ISO 8601 format, YYYY-MM-DDTHH:MM:SS.mmmmmm or, if microsecond is 0, YYYY-MM-DDTHH:MM:SS
If utcoffset() does not return None, a 6-character string is appended, giving the UTC offset in (signed) hours and minutes: YYYY-MM-DDTHH:MM:SS.mmmmmm+HH:MM or, if microsecond is 0 YYYY-MM-DDTHH:MM:SS+HH:MM
The optional argument sep (default 'T') is a one-character separator, placed between the date and time portions of the result. For example,
>>>
>>> from datetime import tzinfo, timedelta, datetime
>>> class TZ(tzinfo):
... def utcoffset(self, dt): return timedelta(minutes=-399)
...
>>> datetime(2002, 12, 25, tzinfo=TZ()).isoformat(' ')
'2002-12-25 00:00:00-06:39'
回答5:
The ISO 8601 time format does not store a time zone name, only the corresponding UTC offset is preserved.
To convert a file ctime to an ISO 8601 time string while preserving the UTC offset in Python 3:
>>> import os
>>> from datetime import datetime, timezone
>>> ts = os.path.getctime(some_file)
>>> dt = datetime.fromtimestamp(ts, timezone.utc)
>>> dt.astimezone().isoformat()
'2015-11-27T00:29:06.839600-05:00'
The code assumes that your local timezone is Eastern Time Zone (ET) and that your system provides a correct UTC offset for the given POSIX timestamp (ts), i.e., Python has access to a historical timezone database on your system or the time zone had the same rules at a given date.
If you need a portable solution; use the pytz module that provides access to the tz database:
>>> import os
>>> from datetime import datetime
>>> import pytz # pip install pytz
>>> ts = os.path.getctime(some_file)
>>> dt = datetime.fromtimestamp(ts, pytz.timezone('America/New_York'))
>>> dt.isoformat()
'2015-11-27T00:29:06.839600-05:00'
The result is the same in this case.
If you need the time zone name/abbreviation/zone id, store it separately.
>>> dt.astimezone().strftime('%Y-%m-%d %H:%M:%S%z (%Z)')
'2015-11-27 00:29:06-0500 (EST)'
Note: no, : in the UTC offset and EST timezone abbreviation is not part of the ISO 8601 time format. It is not unique.
Different libraries/different versions of the same library may use different time zone rules for the same date/timezone. If it is a future date then the rules might be unknown yet. In other words, the same UTC time may correspond to a different local time depending on what rules you use -- saving a time in ISO 8601 format preserves UTC time and the local time that corresponds to the current time zone rules in use on your platform. You might need to recalculate the local time on a different platform if it has different rules.
回答6:
ISO 8601 allows a compact representation with no separators except for the T, so I like to use this one-liner to get a quick timestamp string:
>>> datetime.datetime.utcnow().strftime("%Y%m%dT%H%M%S.%fZ")
'20180905T140903.591680Z'
If you don't need the microseconds, just leave out the .%f part:
>>> datetime.datetime.utcnow().strftime("%Y%m%dT%H%M%SZ")
'20180905T140903Z'
For local time:
>>> datetime.datetime.now().strftime("%Y%m%dT%H%M%S")
'20180905T140903'
回答7:
You'll need to use os.stat to get the file creation time and a combination of time.strftime and time.timezone for formatting:
>>> import time
>>> import os
>>> t = os.stat('C:/Path/To/File.txt').st_ctime
>>> t = time.localtime(t)
>>> formatted = time.strftime('%Y-%m-%d %H:%M:%S', t)
>>> tz = str.format('{0:+06.2f}', float(time.timezone) / 3600)
>>> final = formatted + tz
>>>
>>> final
'2008-11-24 14:46:08-02.00'
回答8:
Correct me if I'm wrong (I'm not), but the offset from UTC changes with daylight saving time. So you should use
tz = str.format('{0:+06.2f}', float(time.altzone) / 3600)
I also believe that the sign should be different:
tz = str.format('{0:+06.2f}', -float(time.altzone) / 3600)
I could be wrong, but I don't think so.
回答9:
I agree with Jarek, and I furthermore note that the ISO offset separator character is a colon, so I think the final answer should be:
isodate.datetime_isoformat(datetime.datetime.now()) + str.format('{0:+06.2f}', -float(time.timezone) / 3600).replace('.', ':')
回答10:
Adding a small variation to estani's excellent answer
Local to ISO 8601 with TimeZone and no microsecond info (Python 3):
import datetime, time
utc_offset_sec = time.altzone if time.localtime().tm_isdst else time.timezone
utc_offset = datetime.timedelta(seconds=-utc_offset_sec)
datetime.datetime.now().replace(microsecond=0, tzinfo=datetime.timezone(offset=utc_offset)).isoformat()
Sample Output:
'2019-11-06T12:12:06-08:00'
Tested that this output can be parsed by both Javascript Date and C# DateTime/DateTimeOffset
回答11:
I've developed this function:
def iso_8601_format(dt):
"""YYYY-MM-DDThh:mm:ssTZD (1997-07-16T19:20:30-03:00)"""
if dt is None:
return ""
fmt_datetime = dt.strftime('%Y-%m-%dT%H:%M:%S')
tz = dt.utcoffset()
if tz is None:
fmt_timezone = "+00:00"
else:
fmt_timezone = str.format('{0:+06.2f}', float(tz.total_seconds() / 3600))
return fmt_datetime + fmt_timezone
回答12:
import datetime, time
def convert_enddate_to_seconds(self, ts):
"""Takes ISO 8601 format(string) and converts into epoch time."""
dt = datetime.datetime.strptime(ts[:-7],'%Y-%m-%dT%H:%M:%S.%f')+\
datetime.timedelta(hours=int(ts[-5:-3]),
minutes=int(ts[-2:]))*int(ts[-6:-5]+'1')
seconds = time.mktime(dt.timetuple()) + dt.microsecond/1000000.0
return seconds
>>> import datetime, time
>>> ts = '2012-09-30T15:31:50.262-08:00'
>>> dt = datetime.datetime.strptime(ts[:-7],'%Y-%m-%dT%H:%M:%S.%f')+ datetime.timedelta(hours=int(ts[-5:-3]), minutes=int(ts[-2:]))*int(ts[-6:-5]+'1')
>>> seconds = time.mktime(dt.timetuple()) + dt.microsecond/1000000.0
>>> seconds
1348990310.26
来源：https://stackoverflow.com/questions/2150739/iso-time-iso-8601-in-python