问题
Is it possible in C++ to have a member function that is both static and virtual? Apparently, there isn't a straightforward way to do it (static virtual member(); is a compile error), but is there at least a way to achieve the same effect?
I.E:
struct Object
{
struct TypeInformation;
static virtual const TypeInformation &GetTypeInformation() const;
};
struct SomeObject : public Object
{
static virtual const TypeInformation &GetTypeInformation() const;
};
It makes sense to use GetTypeInformation() both on an instance (object->GetTypeInformation()) and on a class (SomeObject::GetTypeInformation()), which can be useful for comparisons and vital for templates.
The only ways I can think of involves writing two functions / a function and a constant, per class, or use macros.
Any other solutions?
回答1:
No, there's no way to do it, since what would happen when you called Object::GetTypeInformation()? It can't know which derived class version to call since there's no object associated with it.
You'll have to make it a non-static virtual function to work properly; if you also want to be able to call a specific derived class's version non-virtually without an object instance, you'll have to provide a second redunduant static non-virtual version as well.
回答2:
Many say it is not possible, I would go one step further and say it is not meaningfull.
A static member is something that does not relate to any instance, only to the class.
A virtual member is something that does not relate directly to any class, only to an instance.
So a static virtual member would be something that does not relate to any instance or any class.
回答3:
I ran into this problem the other day: I had some classes full of static methods but I wanted to use inheritance and virtual methods and reduce code repetition. My solution was:
Instead of using static methods, use a singleton with virtual methods.
In other words, each class should contain a static method that you call to get a pointer to a single, shared instance of the class. You can make the true constructors private or protected so that outside code can't misuse it by creating additional instances.
In practice, using a singleton is a lot like using static methods except that you can take advantage of inheritance and virtual methods.
回答4:
It is possible!
But what exactly is possible, let's narrow down. People often want some kind of "static virtual function" because of duplication of code needed for being able to call the same function through static call "SomeDerivedClass::myfunction()" and polymorphic call "base_class_pointer->myfunction()". "Legal" method for allowing such functionality is duplication of function definitions:
class Object
{
public:
static string getTypeInformationStatic() { return "base class";}
virtual string getTypeInformation() { return getTypeInformationStatic(); }
};
class Foo: public Object
{
public:
static string getTypeInformationStatic() { return "derived class";}
virtual string getTypeInformation() { return getTypeInformationStatic(); }
};
What if base class has a great number of static functions and derived class has to override every of them and one forgot to provide a duplicating definition for virtual function. Right, we'll get some strange error during runtime which is hard to track down. Cause duplication of code is a bad thing. The following tries to resolve this problem (and I want to tell beforehand that it is completely type-safe and doesn't contain any black magic like typeid's or dynamic_cast's :)
So, we want to provide only one definition of getTypeInformation() per derived class and it is obvious that it has to be a definition of static function because it is not possible to call "SomeDerivedClass::getTypeInformation()" if getTypeInformation() is virtual. How can we call static function of derived class through pointer to base class? It is not possible with vtable because vtable stores pointers only to virtual functions and since we decided not to use virtual functions, we cannot modify vtable for our benefit. Then, to be able to access static function for derived class through pointer to base class we have to store somehow the type of an object within its base class. One approach is to make base class templatized using "curiously recurring template pattern" but it is not appropriate here and we'll use a technique called "type erasure":
class TypeKeeper
{
public:
virtual string getTypeInformation() = 0;
};
template<class T>
class TypeKeeperImpl: public TypeKeeper
{
public:
virtual string getTypeInformation() { return T::getTypeInformationStatic(); }
};
Now we can store the type of an object within base class "Object" with a variable "keeper":
class Object
{
public:
Object(){}
boost::scoped_ptr<TypeKeeper> keeper;
//not virtual
string getTypeInformation() const
{ return keeper? keeper->getTypeInformation(): string("base class"); }
};
In a derived class keeper must be initialized during construction:
class Foo: public Object
{
public:
Foo() { keeper.reset(new TypeKeeperImpl<Foo>()); }
//note the name of the function
static string getTypeInformationStatic()
{ return "class for proving static virtual functions concept"; }
};
Let's add syntactic sugar:
template<class T>
void override_static_functions(T* t)
{ t->keeper.reset(new TypeKeeperImpl<T>()); }
#define OVERRIDE_STATIC_FUNCTIONS override_static_functions(this)
Now declarations of descendants look like:
class Foo: public Object
{
public:
Foo() { OVERRIDE_STATIC_FUNCTIONS; }
static string getTypeInformationStatic()
{ return "class for proving static virtual functions concept"; }
};
class Bar: public Foo
{
public:
Bar() { OVERRIDE_STATIC_FUNCTIONS; }
static string getTypeInformationStatic()
{ return "another class for the same reason"; }
};
usage:
Object* obj = new Foo();
cout << obj->getTypeInformation() << endl; //calls Foo::getTypeInformationStatic()
obj = new Bar();
cout << obj->getTypeInformation() << endl; //calls Bar::getTypeInformationStatic()
Foo* foo = new Bar();
cout << foo->getTypeInformation() << endl; //calls Bar::getTypeInformationStatic()
Foo::getTypeInformation(); //compile-time error
Foo::getTypeInformationStatic(); //calls Foo::getTypeInformationStatic()
Bar::getTypeInformationStatic(); //calls Bar::getTypeInformationStatic()
Advantages:
- less duplication of code (but we have to call OVERRIDE_STATIC_FUNCTIONS in every constructor)
Disadvantages:
- OVERRIDE_STATIC_FUNCTIONS in every constructor
- memory and performance overhead
- increased complexity
Open issues:
1) there are different names for static and virtual functions how to solve ambiguity here?
class Foo
{
public:
static void f(bool f=true) { cout << "static";}
virtual void f() { cout << "virtual";}
};
//somewhere
Foo::f(); //calls static f(), no ambiguity
ptr_to_foo->f(); //ambiguity
2) how to implicitly call OVERRIDE_STATIC_FUNCTIONS inside every constructor?
回答5:
While Alsk has already given a pretty detailed answer, I'd like to add an alternative, since I think his enhanced implementation is overcomplicated.
We start with an abstract base class, that provides the interface for all the object types:
class Object
{
public:
virtual char* GetClassName() = 0;
};
Now we need an actual implementation. But to avoid having to write both the static and the virtual methods, we will have our actual object classes inherit the virtual methods. This does obviously only work, if the base class knows how to access the static member function. So we need to use a template and pass the actual objects class name to it:
template<class ObjectType>
class ObjectImpl : public Object
{
public:
virtual char* GetClassName()
{
return ObjectType::GetClassNameStatic();
}
};
Finally we need to implement our real object(s). Here we only need to implement the static member function, the virtual member functions will be inherited from the ObjectImpl template class, instantiated with the name of the derived class, so it will access it's static members.
class MyObject : public ObjectImpl<MyObject>
{
public:
static char* GetClassNameStatic()
{
return "MyObject";
}
};
class YourObject : public ObjectImpl<YourObject>
{
public:
static char* GetClassNameStatic()
{
return "YourObject";
}
};
Let's add some code to test:
char* GetObjectClassName(Object* object)
{
return object->GetClassName();
}
int main()
{
MyObject myObject;
YourObject yourObject;
printf("%s\n", MyObject::GetClassNameStatic());
printf("%s\n", myObject.GetClassName());
printf("%s\n", GetObjectClassName(&myObject));
printf("%s\n", YourObject::GetClassNameStatic());
printf("%s\n", yourObject.GetClassName());
printf("%s\n", GetObjectClassName(&yourObject));
return 0;
}
Addendum (Jan 12th 2019):
Instead of using the GetClassNameStatic() function, you can also define the the class name as a static member, even "inline", which IIRC works since C++11 (don't get scared by all the modifiers :)):
class MyObject : public ObjectImpl<MyObject>
{
public:
// Access this from the template class as `ObjectType::s_ClassName`
static inline const char* const s_ClassName = "MyObject";
// ...
};
回答6:
It is possible. Make two functions: static and virtual
struct Object{
struct TypeInformation;
static const TypeInformation &GetTypeInformationStatic() const
{
return GetTypeInformationMain1();
}
virtual const TypeInformation &GetTypeInformation() const
{
return GetTypeInformationMain1();
}
protected:
static const TypeInformation &GetTypeInformationMain1(); // Main function
};
struct SomeObject : public Object {
static const TypeInformation &GetTypeInformationStatic() const
{
return GetTypeInformationMain2();
}
virtual const TypeInformation &GetTypeInformation() const
{
return GetTypeInformationMain2();
}
protected:
static const TypeInformation &GetTypeInformationMain2(); // Main function
};
回答7:
No, this is not possible, because static member functions lack a this pointer. And static members (both functions and variables) are not really class members per-se. They just happen to be invoked by ClassName::member, and adhere to the class access specifiers. Their storage is defined somewhere outside the class; storage is not created each time you instantiated an object of the class. Pointers to class members are special in semantics and syntax. A pointer to a static member is a normal pointer in all regards.
virtual functions in a class needs the this pointer, and is very coupled to the class, hence they can't be static.
回答8:
Well , quite a late answer but it is possible using the curiously recurring template pattern. This wikipedia article has the info you need and also the example under static polymorphism is what you are asked for.
回答9:
No, Static member function can't be virtual .since virtual concept is resolved at run time with the help of vptr, and vptr is non static member of a class.due to that static member function can't acess vptr so static member can't be virtual.
回答10:
I think what you're trying to do can be done through templates. I'm trying to read between the lines here. What you're trying to do is to call a method from some code, where it calls a derived version but the caller doesn't specify which class. Example:
class Foo {
public:
void M() {...}
};
class Bar : public Foo {
public:
void M() {...}
};
void Try()
{
xxx::M();
}
int main()
{
Try();
}
You want Try() to call the Bar version of M without specifying Bar. The way you do that for statics is to use a template. So change it like so:
class Foo {
public:
void M() {...}
};
class Bar : public Foo {
public:
void M() {...}
};
template <class T>
void Try()
{
T::M();
}
int main()
{
Try<Bar>();
}
回答11:
It's not possible, but that's just because an omission. It isn't something that "doesn't make sense" as a lot of people seem to claim. To be clear, I'm talking about something like this:
struct Base {
static virtual void sayMyName() {
cout << "Base\n";
}
};
struct Derived : public Base {
static void sayMyName() override {
cout << "Derived\n";
}
};
void foo(Base *b) {
b->sayMyName();
Derived::sayMyName(); // Also would work.
}
This is 100% something that could be implemented (it just hasn't), and I'd argue something that is useful.
Consider how normal virtual functions work. Remove the statics and add in some other stuff and we have:
struct Base {
virtual void sayMyName() {
cout << "Base\n";
}
virtual void foo() {
}
int somedata;
};
struct Derived : public Base {
void sayMyName() override {
cout << "Derived\n";
}
};
void foo(Base *b) {
b->sayMyName();
}
This works fine and basically what happens is the compiler makes two tables, called VTables, and assigns indices to the virtual functions like this
enum Base_Virtual_Functions {
sayMyName = 0;
foo = 1;
};
using VTable = void*[];
const VTable Base_VTable = {
&Base::sayMyName,
&Base::foo
};
const VTable Derived_VTable = {
&Derived::sayMyName,
&Base::foo
};
Next each class with virtual functions is augmented with another field that points to its VTable, so the compiler basically changes them to be like this:
struct Base {
VTable* vtable;
virtual void sayMyName() {
cout << "Base\n";
}
virtual void foo() {
}
int somedata;
};
struct Derived : public Base {
VTable* vtable;
void sayMyName() override {
cout << "Derived\n";
}
};
Then what actually happens when you call b->sayMyName()? Basically this:
b->vtable[Base_Virtual_Functions::sayMyName](b);
(The first parameter becomes this.)
Ok fine, so how would it work with static virtual functions? Well what's the difference between static and non-static member functions? The only difference is that the latter get a this pointer.
We can do exactly the same with static virtual functions - just remove the this pointer.
b->vtable[Base_Virtual_Functions::sayMyName]();
This could then support both syntaxes:
b->sayMyName(); // Prints "Base" or "Derived"...
Base::sayMyName(); // Always prints "Base".
So ignore all the naysayers. It does make sense. Why isn't it supported then? I think it's because it has very little benefit and could even be a little confusing.
The only technical advantage over a normal virtual function is that you don't need to pass this to the function but I don't think that would make any measurable difference to performance.
It does mean you don't have a separate static and non-static function for cases when you have an instance, and when you don't have an instance, but also it might be confusing that it's only really "virtual" when you use the instance call.
回答12:
No, its not possible, since static members are bound at compile time, while virtual members are bound at runtime.
回答13:
First, the replies are correct that what the OP is requesting is a contradiction in terms: virtual methods depend on the run-time type of an instance; static functions specifically don't depend on an instance -- just on a type. That said, it makes sense to have static functions return something specific to a type. For example, I had a family of MouseTool classes for the State pattern and I started having each one have a static function returning the keyboard modifier that went with it; I used those static functions in the factory function that made the correct MouseTool instance. That function checked the mouse state against MouseToolA::keyboardModifier(), MouseToolB::keyboardModifier(), etc. and then instantiated the appropriate one. Of course later I wanted to check if the state was right so I wanted write something like "if (keyboardModifier == dynamic_type(*state)::keyboardModifier())" (not real C++ syntax), which is what this question is asking.
So, if you find yourself wanting this, you may want to rething your solution. Still, I understand the desire to have static methods and then call them dynamically based on the dynamic type of an instance. I think the Visitor Pattern can give you what you want. It gives you what you want. It's a bit of extra code, but it could be useful for other visitors.
See: http://en.wikipedia.org/wiki/Visitor_pattern for background.
struct ObjectVisitor;
struct Object
{
struct TypeInformation;
static TypeInformation GetTypeInformation();
virtual void accept(ObjectVisitor& v);
};
struct SomeObject : public Object
{
static TypeInformation GetTypeInformation();
virtual void accept(ObjectVisitor& v) const;
};
struct AnotherObject : public Object
{
static TypeInformation GetTypeInformation();
virtual void accept(ObjectVisitor& v) const;
};
Then for each concrete Object:
void SomeObject::accept(ObjectVisitor& v) const {
v.visit(*this); // The compiler statically picks the visit method based on *this being a const SomeObject&.
}
void AnotherObject::accept(ObjectVisitor& v) const {
v.visit(*this); // Here *this is a const AnotherObject& at compile time.
}
and then define the base visitor:
struct ObjectVisitor {
virtual ~ObjectVisitor() {}
virtual void visit(const SomeObject& o) {} // Or = 0, depending what you feel like.
virtual void visit(const AnotherObject& o) {} // Or = 0, depending what you feel like.
// More virtual void visit() methods for each Object class.
};
Then the concrete visitor that selects the appropriate static function:
struct ObjectVisitorGetTypeInfo {
Object::TypeInformation result;
virtual void visit(const SomeObject& o) {
result = SomeObject::GetTypeInformation();
}
virtual void visit(const AnotherObject& o) {
result = AnotherObject::GetTypeInformation();
}
// Again, an implementation for each concrete Object.
};
finally, use it:
void printInfo(Object& o) {
ObjectVisitorGetTypeInfo getTypeInfo;
Object::TypeInformation info = o.accept(getTypeInfo).result;
std::cout << info << std::endl;
}
Notes:
- Constness left as an exercise.
- You returned a reference from a static. Unless you have a singleton, that's questionable.
If you want to avoid copy-paste errors where one of your visit methods calls the wrong static function, you could use a templated helper function (which can't itself be virtual) t your visitor with a template like this:
struct ObjectVisitorGetTypeInfo {
Object::TypeInformation result;
virtual void visit(const SomeObject& o) { doVisit(o); }
virtual void visit(const AnotherObject& o) { doVisit(o); }
// Again, an implementation for each concrete Object.
private:
template <typename T>
void doVisit(const T& o) {
result = T::GetTypeInformation();
}
};
回答14:
With c++ you can use static inheritance with the crt method. For the example, it is used widely on window template atl & wtl.
See https://en.wikipedia.org/wiki/Curiously_recurring_template_pattern
To be simple, you have a class that is templated from itself like class myclass : public myancestor. From this point the myancestor class can now call your static T::YourImpl function.
回答15:
Maybe you can try my solution below:
class Base {
public:
Base(void);
virtual ~Base(void);
public:
virtual void MyVirtualFun(void) = 0;
static void MyStaticFun(void) { assert( mSelf != NULL); mSelf->MyVirtualFun(); }
private:
static Base* mSelf;
};
Base::mSelf = NULL;
Base::Base(void) {
mSelf = this;
}
Base::~Base(void) {
// please never delete mSelf or reset the Value of mSelf in any deconstructors
}
class DerivedClass : public Base {
public:
DerivedClass(void) : Base() {}
~DerivedClass(void){}
public:
virtual void MyVirtualFun(void) { cout<<"Hello, it is DerivedClass!"<<endl; }
};
int main() {
DerivedClass testCls;
testCls.MyStaticFun(); //correct way to invoke this kind of static fun
DerivedClass::MyStaticFun(); //wrong way
return 0;
}
回答16:
Like others have said, there are 2 important pieces of information:
- there is no
thispointer when making a static function call and - the
thispointer points to the structure where the virtual table, or thunk, are used to look up which runtime method to call.
A static function is determined at compile time.
I showed this code example in C++ static members in class; it shows that you can call a static method given a null pointer:
struct Foo
{
static int boo() { return 2; }
};
int _tmain(int argc, _TCHAR* argv[])
{
Foo* pFoo = NULL;
int b = pFoo->boo(); // b will now have the value 2
return 0;
}
来源：https://stackoverflow.com/questions/1820477/c-static-virtual-members