How to convert RGB from YUV420p for ffmpeg encoder?

我怕爱的太早我们不能终老 提交于 2019-11-27 04:00:40
pogorskiy

You can use libswscale from FFmpeg like this:

#include <libswscale/swscale.h>
SwsContext * ctx = sws_getContext(imgWidth, imgHeight,
                                  AV_PIX_FMT_RGB24, imgWidth, imgHeight,
                                  AV_PIX_FMT_YUV420P, 0, 0, 0, 0);
uint8_t * inData[1] = { rgb24Data }; // RGB24 have one plane
int inLinesize[1] = { 3*imgWidth }; // RGB stride
sws_scale(ctx, inData, inLinesize, 0, imgHeight, dst_picture.data, dst_picture.linesize);

Note that you should create an instance of the SwsContext object only once, not for each frame.

Ciro Santilli 新疆改造中心996ICU六四事件

Runnable example on FFmpeg 2.7.6

This answer got me on the right path, but:

  • the API changed slightly since: SwsContext * must be struct SwsContext * instead
  • I wanted a minimal runnable example to test it out

The example synthesizes and encodes some colorful frames generated by generate_rgb.

ffmpeg_encoder_set_frame_yuv_from_rgb does the RGB24 to YUV conversion.

Preview of generated output.

#include <libavcodec/avcodec.h>
#include <libavutil/imgutils.h>
#include <libavutil/opt.h>
#include <libswscale/swscale.h>

static AVCodecContext *c = NULL;
static AVFrame *frame;
static AVPacket pkt;
static FILE *file;
struct SwsContext *sws_context = NULL;

static void ffmpeg_encoder_set_frame_yuv_from_rgb(uint8_t *rgb) {
    const int in_linesize[1] = { 3 * c->width };
    sws_context = sws_getCachedContext(sws_context,
            c->width, c->height, AV_PIX_FMT_RGB24,
            c->width, c->height, AV_PIX_FMT_YUV420P,
            0, 0, 0, 0);
    sws_scale(sws_context, (const uint8_t * const *)&rgb, in_linesize, 0,
            c->height, frame->data, frame->linesize);
}

uint8_t* generate_rgb(int width, int height, int pts, uint8_t *rgb) {
    int x, y, cur;
    rgb = realloc(rgb, 3 * sizeof(uint8_t) * height * width);
    for (y = 0; y < height; y++) {
        for (x = 0; x < width; x++) {
            cur = 3 * (y * width + x);
            rgb[cur + 0] = 0;
            rgb[cur + 1] = 0;
            rgb[cur + 2] = 0;
            if ((frame->pts / 25) % 2 == 0) {
                if (y < height / 2) {
                    if (x < width / 2) {
                        /* Black. */
                    } else {
                        rgb[cur + 0] = 255;
                    }
                } else {
                    if (x < width / 2) {
                        rgb[cur + 1] = 255;
                    } else {
                        rgb[cur + 2] = 255;
                    }
                }
            } else {
                if (y < height / 2) {
                    rgb[cur + 0] = 255;
                    if (x < width / 2) {
                        rgb[cur + 1] = 255;
                    } else {
                        rgb[cur + 2] = 255;
                    }
                } else {
                    if (x < width / 2) {
                        rgb[cur + 1] = 255;
                        rgb[cur + 2] = 255;
                    } else {
                        rgb[cur + 0] = 255;
                        rgb[cur + 1] = 255;
                        rgb[cur + 2] = 255;
                    }
                }
            }
        }
    }
    return rgb;
}

/* Allocate resources and write header data to the output file. */
void ffmpeg_encoder_start(const char *filename, int codec_id, int fps, int width, int height) {
    AVCodec *codec;
    int ret;

    codec = avcodec_find_encoder(codec_id);
    if (!codec) {
        fprintf(stderr, "Codec not found\n");
        exit(1);
    }
    c = avcodec_alloc_context3(codec);
    if (!c) {
        fprintf(stderr, "Could not allocate video codec context\n");
        exit(1);
    }
    c->bit_rate = 400000;
    c->width = width;
    c->height = height;
    c->time_base.num = 1;
    c->time_base.den = fps;
    c->gop_size = 10;
    c->max_b_frames = 1;
    c->pix_fmt = AV_PIX_FMT_YUV420P;
    if (codec_id == AV_CODEC_ID_H264)
        av_opt_set(c->priv_data, "preset", "slow", 0);
    if (avcodec_open2(c, codec, NULL) < 0) {
        fprintf(stderr, "Could not open codec\n");
        exit(1);
    }
    file = fopen(filename, "wb");
    if (!file) {
        fprintf(stderr, "Could not open %s\n", filename);
        exit(1);
    }
    frame = av_frame_alloc();
    if (!frame) {
        fprintf(stderr, "Could not allocate video frame\n");
        exit(1);
    }
    frame->format = c->pix_fmt;
    frame->width  = c->width;
    frame->height = c->height;
    ret = av_image_alloc(frame->data, frame->linesize, c->width, c->height, c->pix_fmt, 32);
    if (ret < 0) {
        fprintf(stderr, "Could not allocate raw picture buffer\n");
        exit(1);
    }
}

/*
Write trailing data to the output file
and free resources allocated by ffmpeg_encoder_start.
*/
void ffmpeg_encoder_finish(void) {
    uint8_t endcode[] = { 0, 0, 1, 0xb7 };
    int got_output, ret;
    do {
        fflush(stdout);
        ret = avcodec_encode_video2(c, &pkt, NULL, &got_output);
        if (ret < 0) {
            fprintf(stderr, "Error encoding frame\n");
            exit(1);
        }
        if (got_output) {
            fwrite(pkt.data, 1, pkt.size, file);
            av_packet_unref(&pkt);
        }
    } while (got_output);
    fwrite(endcode, 1, sizeof(endcode), file);
    fclose(file);
    avcodec_close(c);
    av_free(c);
    av_freep(&frame->data[0]);
    av_frame_free(&frame);
}

/*
Encode one frame from an RGB24 input and save it to the output file.
Must be called after ffmpeg_encoder_start, and ffmpeg_encoder_finish
must be called after the last call to this function.
*/
void ffmpeg_encoder_encode_frame(uint8_t *rgb) {
    int ret, got_output;
    ffmpeg_encoder_set_frame_yuv_from_rgb(rgb);
    av_init_packet(&pkt);
    pkt.data = NULL;
    pkt.size = 0;
    ret = avcodec_encode_video2(c, &pkt, frame, &got_output);
    if (ret < 0) {
        fprintf(stderr, "Error encoding frame\n");
        exit(1);
    }
    if (got_output) {
        fwrite(pkt.data, 1, pkt.size, file);
        av_packet_unref(&pkt);
    }
}

/* Represents the main loop of an application which generates one frame per loop. */
static void encode_example(const char *filename, int codec_id) {
    int pts;
    int width = 320;
    int height = 240;
    uint8_t *rgb = NULL;
    ffmpeg_encoder_start(filename, codec_id, 25, width, height);
    for (pts = 0; pts < 100; pts++) {
        frame->pts = pts;
        rgb = generate_rgb(width, height, pts, rgb);
        ffmpeg_encoder_encode_frame(rgb);
    }
    ffmpeg_encoder_finish();
    free(rgb);
}

int main(void) {
    avcodec_register_all();
    encode_example("tmp.h264", AV_CODEC_ID_H264);
    encode_example("tmp.mpg", AV_CODEC_ID_MPEG1VIDEO);
    /* TODO: is this encoded correctly? Possible to view it without container? */
    /*encode_example("tmp.vp8", AV_CODEC_ID_VP8);*/
    return 0;
}

Tested on Ubuntu 15.10. Code on GitHub.

易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!