问题
All of a sudden my project fails to build in Xcode. If I look at the log I see all the needed dependencies being built, and then I get a strange error:
Verify final result code for the complete build operation
Build operation failed without specifying any errors.
Individual build tasks may have failed for unknown reasons.
I removed my code directory and replaced it with a backup, did a clean, tried building all the other components separately (they succeed) - nothing works. I tried a command line build, same issue.
There were only a few hits on google for this error, none offered any useful advice.
Can anyone please help?
Update: When I run the command line build, I see the following error:
2012-05-25 08:55:53.830 xcodebuild[3358:4203] No recorder, buildTask: <Xcode3BuildTask: 0x400f35e60:'ProcessPCH MyProject-Prefix.pch':REfc(32370056113422336):deps=0:phaseNum=4>
I checked the output of xcodebuild and it is returning '65'.
I thought there might be a problem with the MyProject-Previx.pch file, so I shut off "Precompile Prefix Header", and now I get the same error with a different file:
2012-05-25 09:15:11.784 xcodebuild[3882:3703] No recorder, buildTask: <Xcode3BuildTask: 0x40048ab60:'CompileC HelperRoutines.m':REfc(33777199068741632):deps=0:phaseNum=4>
回答1:
I also encountered same error. I was edited .pch (Prefix Header) file. Then I started getting this strange error. Then I removed all editions which I made in .PCH. Then I quieted my XCode. When I restarted XCode this strange error was gone.
Hope this will work for you also. Best luck Buddy (y)
回答2:
Build operation failed without specifying any errors. Individual build tasks may have failed for unknown reasons. One possible cause is if there are too many (possibly zombie) processes; in this case, rebooting may fix the problem. Some individual build task failures (up to 12) may be listed below.
I've run into this problem consistently recently while running Xcode 9.0 Beta 3 and Xcode 8.3.3.
The fix is to delete ALL in the Derived Data folder. It then seems to work again.
rm -rf ~/Library/Developer/Xcode/DerivedData
NOTE: just cleaning the build or deleting the current build folder for a project does not seem to help.
Hope this helps :)
回答3:
I was hitting this error and it infuriated me for an hour or so. The answer below helped me out a lot: essentially your machine has a ton of running processes, XCode can't handle it, and rebooting your machine is the best answer.
https://stackoverflow.com/a/13183522/1863655
回答4:
I looked around for a bit and the only one that worked for me was shortening my project folder name.
All other tries: restarting, recloning, deleting derived data, etc. didn't work. The only thing that worked was making the project folder name shorter.
回答5:
Happy 2019, everyone, but sad to say this can still happen in Xcode 10.2.
I had four projects open in Xcode but only one failed in this way. I tried a main menu > Product > Clean Build Folder. The little progress spinner started up and 5 minutes later was still spinning. Hmmmm.
So I quit Xcode and in Terminal did a cd ~/Library/Developer/Xcode/DerivedData. Although ls -alww showed only one subfolder named after each of my other projects, as expected, there were five subfolders whose name began with the name of the problem project. I deleted all of them
rm -R ProblemProjectName-*
and relaunched Xcode. Problem solved.
回答6:
Mine gave this error sometimes, also LLVM failed with exit code 1 and clang failed with exit code 255, at different code locations each time. I just had to reboot (OS X 10.7, Xcode 4.5).
回答7:
I rebooted, no luck. Then I noticed that when I relaunched XCode, one of my tabs was loaded with no file in it. I figured out what file I was editing in it, opened it, saved it and then I was able to build.
回答8:
None of these answers worked for me on XCode 5.
Luckily, I'm still only testing XCode 5 - I kept XCode 4 around.
XCode 5 simply won't build one of my two projects, claiming that my libraries aren't built with the right settings, and I keep running into the error described on this page on the other one... so I'm sticking with XCode 4, which builds both of my projects perfectly well.
If you are experiencing this issue on XCode 5, consider "reverting to XCode 4" as another strategy.
Overall the idea that repeatedly running a program, XCode or not, degrades your system to the point where you have to reboot does not fill me with confidence in that program.
回答9:
With Xcode 5.0.0, this error was caused after an update to the CLI tools.
Updating to Xcode 5.0.1 and installing all the required components again still didn't fix the error. However, 5.0.1 was kind enough to actually emit an error that was useful.
/bin/mkdir -p /Users/xxx/Documents/XCode/SampleApp/bin/SampleAppDebug.app/Contents
error: (null)
This lead me to look at the bin folder, and find out that the 5.0.0 build with broken CLI tools had made a symlink in bin/ to the derived information folder with SampleAppDebug.app, which for some reason it could not write to.
I manually removed all contents of the bin/ folder and rebuilt without errors.
回答10:
I faced same problem. I have change my System time.I delete file "/Users/YOURNAME/Library/Developer/Xcode/DerivedData/ModuleCache/YOURBUNDLEID/UIKit.pcm". Then it's work fine for me. Try this.
回答11:
I added into the Framework search paths the header file location.... removing this from the top level project settings fixed the issue for me.
Change at your peril.
回答12:
The only workaround, that works for me - push your code to git repo and clone it to new location. I highly recommend to reclone your repo, because you'll deal with some random problems if you prefer rebooting/turning off and onXcode.
回答13:
did you set "Perform Single-Object Prelink" to Yes? try turn it off.
i had the similar problem. i have tons of files in a static library. reducing the number of files or setting "Perform Single-Object Prelink" to NO solved my problem.
回答14:
Same error and following didn't work for me for Xcode 6.3.2 on Mac OS X Yosemite 10.10.3:
- Git discarded changes to last successful build point
- Creation of new fresh project from scratch from a builtin template (though I cannot recall whether it built successfully or not)
- Restart of Xcode
- System Reboot
and the following worked:
- I faced the problem in the morning and it got resolved in the evening with a couple of Xcode restarts and System reboots and creation of new project. So, I'm not sure what really triggered.
回答15:
I faced the same problem today. Cleaning the DerivedData and cloning the project somewhere else didn't help. What fixed my problem was repairing the volume from the Disk Utility app and removal of all Xcode plugins.
回答16:
I have encountered same issue without having any code changes for my project running on Xcode 9.2. It looks like if you have some run scripts or external build systems attached to the project, this might cause an issue. Try committing or discarding changes and build again. If it still persist, delete local repo and clone again. Also maintain smaller folder names for project location.
回答17:
Build operation failed without specifying any errors. Individual build tasks may have failed for unknown reasons.
One possible cause is if there are too many (possibly zombie) processes; in this case, rebooting may fix the problem.
Some individual build task failures (up to 12) may be listed below.
This happens occur when the total path length is too long.
change the folder name or location of directory, shorter then before.
回答18:
Same issue when added watchOS target inside iOS app, using Xcode 11.1 with SwiftUI:
- Go to menu Xcode / Preferences / Locations
- Open Derived Data folder in Finder clicking on the arrow next to /Users/yourUserName/Library/Developer/Xcode/DerivedData
- Locate your app Derived Data folder and delete it
- Menu Product / Clean Build Folder
You should be able to compile again.
来源：https://stackoverflow.com/questions/10754784/xcode-fails-without-specifying-and-errors