问题
I'm trying to write 10,12 bit RGB TIFF files with LibTIFF.
The pixel data is saved locally in an unsigned short buffer (16bits)
1) If I set TIFFTAG_BITSPERSAMPLE to 10 or 12, not enough bits are being read from the buffer, and the output is incorrect. (I understand that it is just reading 10 or 12 bits per component, instead of 16 and this is the problem)
2) I tried packing the bits in the buffer, so that it is really 12-R, 12-G, 12-B. In this case, I think the file is being written correctly but no viewer I could find could display this image properly.
3) If I set TIFFTAG_BITSPERSAMPLE to 16, viewers can display the TIFF image, but then I have a problem that I don't know if the image was originally 10 or 12 bits (If I want to later read it with LibTIFF). Also, the viewer expects the dynamic range to be 16 bits and not 10 or 12, also resulting in a bad view.
4) The most annoying part is that I couldn't find one 10, 12, or 14 bit TIFF image on the web to see what the header is supposed to look like.
So finally, what is the proper way to write 10 or 12 bit Image data to a TIFF file ?????
回答1:
The TIFF specification does not specify a way to store 10, 12 or 14 bits per channel in an image. Depending on the encoder and decoder, it may still be possible to work with such images, but it is effectively an implementation detail, as they are not required to do this.
If you want more than 8 bits of precision in a TIFF, your only choice is 16 (or floating point, but that's a different story).
I'm not aware of any image format with specific support for these bitdepths, so viewers will likely be a problem anyway if you must store the image with that specific bitdepth. The simplest workaround I can think of would be to just store as 16 bits per pixel and put the original bitdepth as metadata (e.g. in an ImageDescription tag), but it all depends on what the images will be used for and why you need this information.
来源：https://stackoverflow.com/questions/7068183/writing-10-12-bit-tiff-files-with-libtiff-c