capturing right-click+left-click with autohotkey; unexpected behaviour

问题

I want to capture the key event "right mouse button pressed, then left mouse button pressed". No problem in autohotkey. However I am having trouble with still allowing the right-mouse key to work alone.

1) this works:

RButton & LButton::
    Send X
Return

works as expected:

If I press right mouse button, then left mouse button, "X" is sent to the active window
right-click event is captured by Authotkey: no context menu appears when I press the right mouse button alone. This is the intended outcome

2) this works

~RButton & LButton::
    Send Y
Return

works as expected:

If I press right mouse button, then left mouse button, "Y" is sent to the active window
right-click event is not captured by Authotkey: context menu does appear when I press the right mouse button alone or together with the left button. This is the intended outcome

3) Now I want to do different things depending on the active window.

this does not work (careful: this will disable righ-click in every application)

#If WinActive("ahk_class MozillaWindowClass")

RButton & LButton::
    Send X
Return


#If !WinActive("ahk_class MozillaWindowClass")
~RButton & LButton::
    Send Y
Return

does not work as expected:

in Firefox left-right sends X, in other applications left-right sends Y
however, right-click is disabled in every application

What am I doing wrong here?

edit:

the goal is this: I want a global hotkey on Right+left-click with RButton & LButton . In specific applications that I have tested for compatibility, I want right+left click to suppress sending right-click, and then send right-click manually using autohotkey. However, since some applications might have trouble processing mouseevents sent by autohotkey, in all untested applications I want to use ~RButton & LButton with the ~ to pass throught right-click events

回答1:

Here's one that supports right click dragging!

Hotkey, LButton, off

#IfWinActive ahk_class MozillaWindowClass
RButton & LButton::
    Send X
Return

RButton::return

#IfWinNotActive ahk_class MozillaWindowClass
~$RButton::
Hotkey, LButton, on
while GetKeyState("RButton", "P") {
    continue
    }
Hotkey, LButton, off
Return

LButton::Send Y
Return

It handles RButton manually. When RButton is pressed, it enables the LButton hotkey and waits for RButton to be released before deactivating it. The RButton hotkey uses ~, which passes the click through normally.

LButton is disabled at the start by the line at the top.

Another way would have been to send {RButton Down} at the start of the hotkey and {RButton Up} at the end.

In response to your edit, the only programs that reject Autohotkey's sent events should be those that rely on low level hooks... The real trouble with the method down at the bottom is it only sends a single click, not processing holding the button. This method, and sending down and up separately, should both do that properly.

The bug with active window described at the bottom of this answer still exists, but that's a problem with the #IfWin[Not]Active.

Old stuff

See the documentation on the ampersand (emphasis mine):

You can define a custom combination of two keys (except joystick buttons) by using " & " between them. In the below example, you would hold down Numpad0 then press the second key to trigger the hotkey:
Numpad0 & Numpad1::MsgBox You pressed Numpad1 while holding down Numpad0.
Numpad0 & Numpad2::Run Notepad
In the above example, Numpad0 becomes a prefix key; but this also causes Numpad0 to lose its original/native function when it is pressed by itself. To avoid this, a script may configure Numpad0 to perform a new action such as one of the following:
Numpad0::WinMaximize A   ; Maximize the active/foreground window.
Numpad0::Send {Numpad0}  ; Make the release of Numpad0 produce a Numpad0 keystroke. See comment below.
The presence of one of the above hotkeys causes the release of Numpad0 to perform the indicated action, but only if you did not press any other keys while Numpad0 was being held down.

So, following that example:

#If WinActive("ahk_class MozillaWindowClass")

RButton & LButton::
    Send X
Return

RButton::return

#If !WinActive("ahk_class MozillaWindowClass")
RButton & LButton::
    Send Y
Return

RButton::Send {RButton}

Note RButton requires a variant that does nothing in WinActive, at least with my testing (see below): RButton::return

Since I'm using Autohotkey standard, not Autohotkey_L, I don't have #If and the above was untested. The following I did test, and it works.

#IfWinActive ahk_class MozillaWindowClass
RButton & LButton::
    Send X
Return

RButton::return


#IfWinNotActive ahk_class MozillaWindowClass
RButton & LButton::
    Send Y
Return

RButton::Send {RButton}

An interesting bug I've noticed is the second (NotActive) variant applies occasionally to Firefox:

Another window is active
RButton down is sent
Firefox is not active, so the second variant is processed
<delay> (RButton is held down, though the delay could be imperceptible, in the order of milliseconds, to infinite)
Firefox becomes active
<delay> (still held down)
RButton up is sent, which sends RButton as per the documentation. Because Firefox became active in the delay between the active window check and when RButton is sent, RButton is sent to Firefox.

This happens when both Firefox and another window are visible, and the other window is the active one at the time of the click.

I've tried to fix this bug by adding an extra IfWinNotActive check within the RButton hotkey, but it did not seem to work.

来源：https://stackoverflow.com/questions/10317568/capturing-right-clickleft-click-with-autohotkey-unexpected-behaviour

标签

windows

mouse

AutoHotKey