We are building a PowerBI reporting solution and I (well Stack) solved one problem and the business came up with a new reporting idea. Not sure of the best way to approach it as I know very little about PowerBI and the business seems to want quite complex reports.
We have two sequences of events from separate data sources. They both contain independent events occurring to vehicles. One describes what location a vehicle is within - the other describes incident events which have a reason code for the incident. The business wants to report on time spent in each location for each reason. Vehicles can change location totally independent of the incident events occurring - and events actually are datetime and occur at random points throughtout day. Each type of event has a startime/endtime and a vehicleID.
Vehicle Location Events
+------------------+-----------+------------+-----------------+----------------+
| LocationDetailID | VehicleID | LocationID | StartDateTime | EndDateTime |
+------------------+-----------+------------+-----------------+----------------+
| 1 | 1 | 1 | 2012-1-1 | 2016-1-1 |
| 2 | 1 | 2 | 2016-1-1 | 2016-4-1 |
| 3 | 1 | 1 | 2016-4-1 | 2016-11-1 |
| 4 | 2 | 1 | 2011-1-1 | 2016-11-1 |
+------------------+-----------+------------+-----------------+----------------+
Vehicle Status Events
+---------+---------------+-------------+-----------+--------------+
| EventID | StartDateTime | EndDateTime | VehicleID | ReasonCodeID |
+---------+---------------+-------------+-----------+--------------+
| 1 | 2012-1-1 | 2013-1-1 | 1 | 1 |
| 2 | 2013-1-1 | 2015-1-1 | 1 | 3 |
| 3 | 2015-1-1 | 2016-5-1 | 1 | 4 |
| 4 | 2016-5-1 | 2016-11-1 | 1 | 2 |
| 5 | 2015-9-1 | 2016-2-1 | 2 | 1 |
+---------+---------------+-------------+-----------+--------------+
Is there anyway I can correlate the two streams together and calculate total time per Vehicle per ReasonCode per location? This would seem to require me to be able to relate the two events - so a change of location may occur part way through a given ReasonCode.
Calculation Example ReasonCodeID 4
- VehicleID 1 is in location ID 1 from 2012-1-1 to 2016-1-1 and 2016-4-1 to 2016-11-1
- VehicleID 1 is in location ID 2 from 2016-1-1 to 2016-4-1
- VehcileID 1 has ReasonCodeID 4 from 2015-1-1 to 2016-5-1
Therefore first Period in location 1 intersects with 365 days of ReasonCodeID 4 (2015-1-1 to 2016-1-1). 2nd period in location 1 intersects with 30 days (2016-4-1 to 2016-5-1). In location 2 intersects with 91 days of ReasonCodeID 4(2016-1-1 to 2016-4-1
Desired output would be the below.
+-----------+--------------+------------+------------+
| VehicleID | ReasonCodeID | LocationID | Total Days |
+-----------+--------------+------------+------------+
| 1 | 1 | 1 | 366 |
| 1 | 3 | 1 | 730 |
| 1 | 4 | 1 | 395 |
| 1 | 4 | 2 | 91 |
| 1 | 2 | 1 | 184 |
| 2 | 1 | 1 | 154 |
+-----------+--------------+------------+------------+
I have created a SQL fiddle that shows the structure here
Vehicles have related tables and I'm sure the business will want them grouped by vehicle class etc but if I can understand how to calculate the intersection points in this case that would give me the basis for rest of reporting.
I think this solution requires a CROSS JOIN implementation. The relationship between both tables is Many to Many which implies the creation of a third table that bridges LocationEvents and VehicleStatusEvents tables so I think specifying the relationship in the expression could be easier.
I use a CROSS JOIN between both tables, then filter the results only to get those rows which VehicleID columns are the same in both tables. I am also filtering the rows that VehicleStatusEvents range dates intersects LocationEvents range dates.
Once the filtering is done I am adding a column to calculate the count of days between each intersection. Finally, the measure sums up the days for each VehicleID, ReasonCodeID and LocationID.
In order to implement the CROSS JOIN you will have to rename the VehicleID, StartDateTime and EndDateTime on any of both tables. It is necessary for avoiding ambigous column names errors.
I rename the columns as follows:
VehicleID : LocationVehicleID and StatusVehicleID StartDateTime : LocationStartDateTime and StatusStartDateTime EndDateTime : LocationEndDateTime and StatusEndDateTime
After this you can use CROSSJOIN in the Total Days measure:
Total Days =
SUMX (
FILTER (
ADDCOLUMNS (
FILTER (
CROSSJOIN ( LocationEvents, VehicleStatusEvents ),
LocationEvents[LocationVehicleID] = VehicleStatusEvents[StatusVehicleID]
&& LocationEvents[LocationStartDateTime] <= VehicleStatusEvents[StatusEndDateTime]
&& LocationEvents[LocationEndDateTime] >= VehicleStatusEvents[StatusStartDateTime]
),
"CountOfDays", IF (
[LocationStartDateTime] <= [StatusStartDateTime]
&& [LocationEndDateTime] >= [StatusEndDateTime],
DATEDIFF ( [StatusStartDateTime], [StatusEndDateTime], DAY ),
IF (
[LocationStartDateTime] > [StatusStartDateTime]
&& [LocationEndDateTime] >= [StatusEndDateTime],
DATEDIFF ( [LocationStartDateTime], [StatusEndDateTime], DAY ),
IF (
[LocationStartDateTime] <= [StatusStartDateTime]
&& [LocationEndDateTime] <= [StatusEndDateTime],
DATEDIFF ( [StatusStartDateTime], [LocationEndDateTime], DAY ),
IF (
[LocationStartDateTime] >= [StatusStartDateTime]
&& [LocationEndDateTime] <= [StatusEndDateTime],
DATEDIFF ( [LocationStartDateTime], [LocationEndDateTime], DAY ),
BLANK ()
)
)
)
)
),
LocationEvents[LocationID] = [LocationID]
&& VehicleStatusEvents[ReasonCodeID] = [ReasonCodeID]
),
[CountOfDays]
)
Then in Power BI you can build a matrix (or any other visualization) using this measure:
If you don't understand completely the measure expression, here is the T-SQL translation:
SELECT
dt.VehicleID,
dt.ReasonCodeID,
dt.LocationID,
SUM(dt.Diff) [Total Days]
FROM
(
SELECT
CASE
WHEN a.StartDateTime <= b.StartDateTime AND a.EndDateTime >= b.EndDateTime -- Inside range
THEN DATEDIFF(DAY, b.StartDateTime, b.EndDateTime)
WHEN a.StartDateTime > b.StartDateTime AND a.EndDateTime >= b.EndDateTime -- |-----|*****|....|
THEN DATEDIFF(DAY, a.StartDateTime, b.EndDateTime)
WHEN a.StartDateTime <= b.StartDateTime AND a.EndDateTime <= b.EndDateTime -- |...|****|-----|
THEN DATEDIFF(DAY, b.StartDateTime, a.EndDateTime)
WHEN a.StartDateTime >= b.StartDateTime AND a.EndDateTime <= b.EndDateTime -- |---|****|-----
THEN DATEDIFF(DAY, a.StartDateTime, a.EndDateTime)
END Diff,
a.VehicleID,
b.ReasonCodeID,
a.LocationID --a.StartDateTime, a.EndDateTime, b.StartDateTime, b.EndDateTime
FROM LocationEvents a
CROSS JOIN VehicleStatusEvents b
WHERE a.VehicleID = b.VehicleID
AND
(
(a.StartDateTime <= b.EndDateTime)
AND (a.EndDateTime >= b.StartDateTime)
)
) dt
GROUP BY dt.VehicleID,
dt.ReasonCodeID,
dt.LocationID
Note in T-SQL you could use an INNER JOIN operator too.
Let me know if this helps.
select coalesce(l.VehicleID,s.VehicleID) as VehicleID
,s.ReasonCodeID
,l.LocationID
,sum
(
datediff
(
day
,case when s.StartDateTime > l.StartDateTime then s.StartDateTime else l.StartDateTime end
,case when s.EndDateTime < l.EndDateTime then s.EndDateTime else l.EndDateTime end
)
) as TotalDays
from VehicleLocationEvents as l
full join VehicleStatusEvents as s
on s.VehicleID =
l.VehicleID
and case when s.StartDateTime > l.StartDateTime then s.StartDateTime else l.StartDateTime end <=
case when s.EndDateTime < l.EndDateTime then s.EndDateTime else l.EndDateTime end
group by coalesce(l.VehicleID,s.VehicleID)
,s.ReasonCodeID
,l.LocationID
or
select VehicleID
,ReasonCodeID
,LocationID
,sum (datediff (day,max_StartDateTime,min_EndDateTime)) as TotalDays
from (select coalesce(l.VehicleID,s.VehicleID) as VehicleID
,s.ReasonCodeID
,l.LocationID
,case when s.StartDateTime > l.StartDateTime then s.StartDateTime else l.StartDateTime end as max_StartDateTime
,case when s.EndDateTime < l.EndDateTime then s.EndDateTime else l.EndDateTime end as min_EndDateTime
from VehicleLocationEvents as l
full join VehicleStatusEvents as s
on s.VehicleID =
l.VehicleID
) ls
where max_StartDateTime <= min_EndDateTime
group by VehicleID
,ReasonCodeID
,LocationID
来源：https://stackoverflow.com/questions/40452027/correlate-sequences-of-independent-events-calculate-time-intersection