HTTP Error 500.19 and error code : 0x80070021

Question

I have a simple webAPI build by Visual Studio 2013. It works well when I run it from VS13 but when I copy the project in local IIS it gives me the following error.

HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid.

Detailed Error Information:

Module IIS Web Core

Notification BeginRequest

Handler Not yet determined

Error Code 0x80070021

Config Error This configuration section cannot be used at this path. This happens when the section is locked at a parent level. Locking is either by default (overrideModeDefault="Deny"), or set explicitly by a location tag with overrideMode="Deny" or the legacy allowOverride="false".

Config File \?\C:\inetpub\wwwroot\APITeslin\web.config

Config Source:

36:   <system.webServer>  
37:     <handlers>  
38:       <remove name="ExtensionlessUrlHandler-Integrated-4.0" />

Answer 1

Got precisely the same error and came to this question. As @SpaceBison mentioned in comments, this answer describes the solution - https://stackoverflow.com/a/12867753/404099. I spotted it too late and it misses some steps. This is what worked for me:

Windows Server 2012, IIS 8.5. Should work for other versions too.

• Go to server manager, click add roles and features
• In the roles section choose: Web Server
  • Under Security sub-section choose everything (I excluded digest, IP restrictions and URL authorization as we don't use them)
  • Under Application Development choose .NET Extensibility 4.5, ASP.NET 4.5 and both ISAPI entries
• In the features section choose: NET 3.5, .NET 4.5, ASP.NET 4.5
• In the web server section choose: Web Server (all), Management Tools (IIS Management Console and Management Service), Windows Authentication - if you are using any of it

Answer 2

I got this error while trying to host a WCF service in an empty ASP.NET application. The whole solution was using .NET 4.5 platform, on IIS 8.5 running on Windows 8.1. The gotcha was to

1. Open up "Turn Windows Features on or off"
2. Go to WCF section under ASP.NET 4.5 advanced services
3. Check HTTP Activation.

4. You'll be asked to restart the system.

   

This should Fix the HTTP 500.19!

EDIT 11-FEB-2016 Just got an issue on Windows 10 Pro, IIS 10, This time, it was an HTTP 404.0. The fix is still the same, turn on "HTTP Activation" under Windows Features -> .NET Framework 4.6 Advanced Services -> WCF Services -> HTTP Activation

Answer 3

I also was getting the same problem but after brain storming with IIS and google for many hours. I found out the solution. This error is because some settings are disabled in IIS applicationHost.config.

Below are the steps to solution:

1. Go to C:\Windows\System32\inetsrv\config\applicationHost.config and open in notepad

2. Change the following key value present in

   • <section name="handlers" overrideModeDefault="Deny" /> change this value from "Deny" to "Allow"

   • <section name="modules" allowDefinition="MachineToApplication" overrideModeDefault="Deny" /> change this value from "Deny" to "Allow"

It worked for me.

Answer 4

If you're running IIS on that computer for the first time, you should try running the ASP.NET IIS registration tool (aspnet_regiis.exe).

Here's how to do that: If you're using .net framework v4, open command prompt as an administrator, and change directory to your .net framework base folder using:

CD C:\Windows\Microsoft.NET\Framework\v4.0.30319

or, if you're using a 64 bit computer, use:

CD C:\Windows\Microsoft.NET\Framework64\v4.0.30319

when you've successfully navigated to the appropriate directory, execute the ASP.NET IIS registration tool using:

aspnet_regiis -i

If you're using a different .NET framework version, simply replace v4.0.30319 with the appropriate folder name.

Hope this helps.

Answer 5

I solved this by doing the following:

WebServer(ISS)->WebServer->Application Development
add .NET Extensibility 3.5
add .NET Extensibility 4.5
add ASP.NET 4.5
add ISAPI Extensions
add ISAPI Filters

Answer 6

On Windows 8.1, IIS 8.5 the solution for me was to register 4.5 from the control panel:

Programs and Features > Turn Windows features on or off > Information Information Services > World Wide Web Services > Application Development Features > Select ASP.NET 4.5

Click OK.

Answer 7

As the error idnicates - "This happens when the section is locked at a parent level". To unlock the section you can use appcmd.exe and execute the following command:

%windir%\system32\inetsrv\appcmd.exe unlock config -section:system.webServer/handlers -commitpath:apphost

For more information on about section locking and what a parent configuration context is refer to IIS documentation.

Answer 8

In my case, there were rules for IIS URL Rewrite module but I didn't have that module installed. You should check your web.config if there are any modules included but not installed.

Answer 9

In our case, we struggled with this error for quite some days. It turns out that in control panel, programs, turn windows features on or off.

We selected Internet Information Services, world wide web services, Application development features and there we check the set of features associated with our development environment. For example: ASP.NET 4.6. .NET Extensibility 4.6, etc.

It works!

Answer 10

Try unlocking the relevant IIS (7.5) configuration settings at server level, as follows:

1. Open IIS Manager
2. Select the server in the Connections pane
3. Open Configuration Editor in the main pane
4. In the Sections drop down, select the section to unlock, e.g. system.webServer > defaultPath
5. Click Unlock Attribute in the right pane
6. Repeat for any other settings which you need to unlock
7. Restart IIS (optional) - Select the server in the Conncetions pane, click Restart in the Actions pane

Answer 11

Your web.config describes that you're using forms authentication - make sure you enable forms authentication and disable anonymous authentication in IIS under the Authentication menu, for the website that is running in IIS.

Answer 12

Please <staticContent /> line and erased it from the web.config.

Answer 13

Well, we're using Amazon Web Services and so we are looking to use scripts and programs to get through this problem. So I have been on the hunt for a command line tool. So first I tried the trick of running

c:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i

but because I'm running a cloud based Windows Server 2012 it complained

This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.

and I Googled and found the official Microsoft Support Page KB2736284. So there is a command line tool dism.exe. So I tried the following

dism /online /enable-feature /featurename:IIS-ASPNET45

but it complained and gave a list of featurenames to try, so I tried them one by one and I tested my WebAPI webpage after each and it worked after the bottom one in the list.

dism /online /enable-feature /featurename:IIS-ApplicationDevelopment
dism /online /enable-feature /featurename:IIS-ISAPIFilter 
dism /online /enable-feature /featurename:IIS-ISAPIExtensions 
dism /online /enable-feature /featurename:IIS-NetFxExtensibility45 

And so now I can browse to my WebAPI site and see the API information. That should help a few people. [However, I am not out of the woods totally myself yet and I cannot reach the website from outside the box. Still working on it.]

Also, I did some earlier steps following other people responses. I can confirm that the following Feature Delegation needs to be change (though I'd like to find a command line tool for these).

In Feature delegation

Change 
'Handler Mappings' from Read Only to Read/Write

Change 
'Modules' from Read Only to Read/Write

Change 
'SSL Settings' from Read Only to Read/Write

Answer 14

For .NET Core apps on Windows Server (in my case 2012 with IIS 10) it worked after install .NET Core Windows Server Hosting bundle (link).

Answer 15

Check if IIS server installed the URL rewrite feature.
If it is not installed then make sure your web.config file don't have the URL rewrite related configuration

<!-- Make sure don't have below config, if server have not installed url rewrite feature. -->
<rewrite>
  <rules>
    <rule name="Fail bad requests">
      <match url=".*"/> ...

Some time we copied the config from legacy server and straight away deploy to brand new server, then we may encounter such kind of 500 issue.

Answer 16

I fixed with removed anonymousAuthentication.
Just comment in your web config IIS

<security>          
    <!--
    <authentication>
        <anonymousAuthentication userName=""/>
    </authentication>
    -->
</security> 

Answer 17

It works and save my time. Try it HTTP Error 500.19 – Internal Server Error – 0x80070021 (IIS 8.5)

Answer 18

The solution that worked for me was to delete my current Web.config and add a new one. That solved the problem for me