问题
I am new to wireshark and trying to write simple queries. To see the dns queries that are only sent from my computer or received by my computer, i tried the following:
dns and ip.addr==159.25.78.7
where 159.25.78.7 is my ip address. It looks like i did it when i look at the filter results but i wanted to be sure about that. Does that filter really do what i am trying to find out? I doubted a little bit because in the filter results i also see only 1 other result whose protocol is ICMP and its info says "Destination unreachable (Port unreachable)".
Can anyone help me with this?
Thanks
回答1:
I would go through the packet capture and see if there are any records that I know I should be seeing to validate that the filter is working properly and to assuage any doubts.
That said, please try the following filter and see if you're getting the entries that you think you should be getting:
dns and ip.dst==159.25.78.7 or dns and ip.src==159.57.78.7
回答2:
Rather than using a DisplayFilter you could use a very simple CaptureFilter like
port 53
See the "Capture only DNS (port 53) traffic" example on the CaptureFilters wiki.
回答3:
use this filter:
(dns.flags.response == 0) and (ip.src == 159.25.78.7)
what this query does is it only gives dns queries originated from your ip
来源：https://stackoverflow.com/questions/20250897/how-to-filter-wireshark-to-see-only-dns-queries-that-are-sent-received-from-by-m