For my application, I need to decode an MP3 file which is stored in an NSData object.
For security reasons, it is undesirable to write the NSData object to disk and re-open it using a System URL reference, even if its only locally stored for a few moments.
I would like to take advantage Extended Audio File Services (or Audio File Services) to do this, but I'm having trouble getting a representation of the NSData, which exists only in memory, that can be read by these Audio File Services.
Edit: I want to decode the MP3 data so I can get access to linear, PCM audio samples for manipulation. Playing back from NSData object is not a problem.
My code is as follows:
decryptedData; //an NSData object which has already been initialized
const void *dataBytes = decryptedData.bytes; //pointer to the bytes in my NSData object
//this creates a CFURLRef from the pointer to the byte data
//I have printed out the resulting CFURL and have confirmed that it is indeed reading the bytes correctly
CFURLRef audioFileURLFromBytes = CFURLCreateWithBytes (kCFAllocatorDefault,
dataBytes,
decryptedData.length,
kCFStringEncodingASCII,
NULL);
//attempt to open the the URL using Extended Audio File Services
ExtAudioFileRef outExtAudioFile;
OSStatus err = 0;
err = ExtAudioFileOpenURL(audioFileURLFromBytes, &outExtAudioFile);
if (err != noErr) {
NSLog(@"ExtAudioFileOpenURL failed with OSStatus Code %i \n", err);
}
//Attempt to open the URL using Audio File Services
AudioFileID audioFile;
OSStatus res = 0;
res = AudioFileOpenURL(audioFileURLFromBytes, kAudioFileReadPermission, kAudioFileMP3Type, &audioFile);
if (res != noErr) {
NSLog(@"AudioFileOpenURL failed with OSStatus Code %i \n", res);
}
Both attempts at opening the URL result in an OSStatus Code 43, which is "file not found".
I have verified that my pointer is pointing to the correct address in memory for the NSData and that the bytes can be read correctly.
Is there some limitation to the Extended Audio File Services that prohibit references to bytes stored in memory?
Thanks for any help you can provide.
Edit: I figured out how to do it using Sbooth's suggestion. Code below: This function takes an NSData object containing an mp3 representation of an audio file. It decodes it as linear PCM so you can get the samples and then re-encodes it as AAC. I don't think MP3 encoding is available in CoreAudio across all platforms (mobile/desktop). This code was tested on my Mac and gets the job done.
-(void) audioFileReaderWithData: (NSData *) audioData {
AudioFileID refAudioFileID;
ExtAudioFileRef inputFileID;
ExtAudioFileRef outputFileID;
OSStatus result = AudioFileOpenWithCallbacks(audioData, readProc, 0, getSizeProc, 0, kAudioFileMP3Type, &refAudioFileID);
if(result != noErr){
NSLog(@"problem in theAudioFileReaderWithData function: result code %i \n", result);
}
result = ExtAudioFileWrapAudioFileID(refAudioFileID, false, &inputFileID);
if (result != noErr){
NSLog(@"problem in theAudioFileReaderWithData function Wraping the audio FileID: result code %i \n", result);
}
// Client Audio Format Description
AudioStreamBasicDescription clientFormat;
memset(&clientFormat, 0, sizeof(clientFormat));
clientFormat.mFormatID = kAudioFormatLinearPCM;
clientFormat.mFramesPerPacket = 1;
clientFormat.mChannelsPerFrame = 2;
clientFormat.mBitsPerChannel = 32;
clientFormat.mBytesPerPacket = clientFormat.mBytesPerFrame = 4 * clientFormat.mChannelsPerFrame;
clientFormat.mFormatFlags = kAudioFormatFlagsNativeFloatPacked;
clientFormat.mSampleRate = 44100;
//Output Audio Format Description
AudioStreamBasicDescription outputFormat;
memset(&outputFormat, 0, sizeof(outputFormat));
outputFormat.mChannelsPerFrame = 2;
outputFormat.mSampleRate = 44100;
outputFormat.mFormatID = kAudioFormatMPEG4AAC;
outputFormat.mFormatFlags = kMPEG4Object_AAC_Main;
outputFormat.mBitsPerChannel = 0;
outputFormat.mBytesPerFrame = 0;
outputFormat.mBytesPerPacket = 0;
outputFormat.mFramesPerPacket = 1024;
// create the outputFile that we're writing to here....
UInt32 outputFormatSize = sizeof(outputFormat);
result = 0;
result = AudioFormatGetProperty(kAudioFormatProperty_FormatInfo, 0, NULL, &outputFormatSize, &outputFormat);
if(result != noErr)
NSLog(@"could not set the output format with status code %i \n",result);
NSMutableString *outputFilePath = [NSMutableString stringWithCapacity: 100];
[outputFilePath setString:@"/Users/You/Desktop/testAudio.m4a"];
NSURL *sourceURL = [NSURL fileURLWithPath:outputFilePath];
result = 0;
result = ExtAudioFileCreateWithURL((CFURLRef)sourceURL, kAudioFileM4AType, &outputFormat, NULL, kAudioFileFlags_EraseFile, &outputFileID);
if(result != noErr){
NSLog(@"ExtAudioFileCreateWithURL failed for outputFileID with status %i \n", result);
}
int size = sizeof(clientFormat);
result = 0;
result = ExtAudioFileSetProperty(inputFileID, kExtAudioFileProperty_ClientDataFormat, size, &clientFormat);
if(result != noErr)
NSLog(@"error on ExtAudioFileSetProperty for input File with result code %i \n", result);
size = sizeof(clientFormat);
result = 0;
result = ExtAudioFileSetProperty(outputFileID, kExtAudioFileProperty_ClientDataFormat, size, &clientFormat);
if(result != noErr)
NSLog(@"error on ExtAudioFileSetProperty for output File with result code %i \n", result);
int totalFrames = 0;
UInt32 outputFilePacketPosition = 0; //in bytes
UInt32 encodedBytes = 0;
while (1) {
UInt32 bufferByteSize = 22050 * 4 * 2;
char srcBuffer[bufferByteSize];
UInt32 numFrames = (bufferByteSize/clientFormat.mBytesPerFrame);
AudioBufferList fillBufList;
fillBufList.mNumberBuffers = 1;
fillBufList.mBuffers[0].mNumberChannels = clientFormat.mChannelsPerFrame;
fillBufList.mBuffers[0].mDataByteSize = bufferByteSize;
fillBufList.mBuffers[0].mData = srcBuffer;
result = 0;
result = ExtAudioFileRead(inputFileID, &numFrames, &fillBufList);
if (result != noErr) {
NSLog(@"Error on ExtAudioFileRead with result code %i \n", result);
totalFrames = 0;
break;
}
if (!numFrames)
break;
totalFrames = totalFrames + numFrames;
result = 0;
result = ExtAudioFileWrite(outputFileID,
numFrames,
&fillBufList);
if(result!= noErr){
NSLog(@"ExtAudioFileWrite failed with code %i \n", result);
}
encodedBytes += numFrames * clientFormat.mBytesPerFrame;
}
//Clean up
ExtAudioFileDispose(inputFileID);
ExtAudioFileDispose(outputFileID);
AudioFileClose(refAudioFileID);
}
And you'll need these functions as well...
static OSStatus readProc(void* clientData,
SInt64 position,
UInt32 requestCount,
void* buffer,
UInt32* actualCount)
{
NSData *inAudioData = (NSData *) clientData;
size_t dataSize = inAudioData.length;
size_t bytesToRead = 0;
if(position < dataSize) {
size_t bytesAvailable = dataSize - position;
bytesToRead = requestCount <= bytesAvailable ? requestCount : bytesAvailable;
[inAudioData getBytes: buffer range:NSMakeRange(position, bytesToRead)];
} else {
NSLog(@"data was not read \n");
bytesToRead = 0;
}
if(actualCount)
*actualCount = bytesToRead;
return noErr;
}
static SInt64 getSizeProc(void* clientData) {
NSData *inAudioData = (NSData *) clientData;
size_t dataSize = inAudioData.length;
return dataSize;
}
The problem is that you're trying to create a CFURLRef object from the audio bytes (MP3 frames) using the ASCII encoding. CFURLCreateWithBytes is meant to be used with byte strings, not binary data (i.e., "http://www.apple.com" as a char *). To accomplish what you want use AudioFileOpenWithCallbacks, pass your NSData object as the refcon, and handle raw reading/seeking in your custom callbacks operating on the NSData that you passed in.
Use Audio Queue Services or AVPlayer for playing audio from a stream or memory.
来源：https://stackoverflow.com/questions/17330135/decode-mp3-file-from-nsdata