I'm trying to write a basic bicubic resize algorithm to resize a 24-bit RGB bitmap. I have a general understanding of the math involved, and I'm using this implementation from Google Code as a guide. I'm not using any external libraries here - I'm just experimenting with the algorithm itself. The bitmap is represented as a plain std::vector<unsigned char>:
inline unsigned char getpixel(const std::vector<unsigned char>& in,
std::size_t src_width, std::size_t src_height, unsigned x, unsigned y, int channel)
{
if (x < src_width && y < src_height)
return in[(x * 3 * src_width) + (3 * y) + channel];
return 0;
}
std::vector<unsigned char> bicubicresize(const std::vector<unsigned char>& in,
std::size_t src_width, std::size_t src_height, std::size_t dest_width, std::size_t dest_height)
{
std::vector<unsigned char> out(dest_width * dest_height * 3);
const float tx = float(src_width) / dest_width;
const float ty = float(src_height) / dest_height;
const int channels = 3;
const std::size_t row_stride = dest_width * channels;
unsigned char C[5] = { 0 };
for (int i = 0; i < dest_height; ++i)
{
for (int j = 0; j < dest_width; ++j)
{
const int x = int(tx * j);
const int y = int(ty * i);
const float dx = tx * j - x;
const float dy = ty * i - y;
for (int k = 0; k < 3; ++k)
{
for (int jj = 0; jj < 4; ++jj)
{
const int z = y - 1 + jj;
unsigned char a0 = getpixel(in, src_width, src_height, z, x, k);
unsigned char d0 = getpixel(in, src_width, src_height, z, x - 1, k) - a0;
unsigned char d2 = getpixel(in, src_width, src_height, z, x + 1, k) - a0;
unsigned char d3 = getpixel(in, src_width, src_height, z, x + 2, k) - a0;
unsigned char a1 = -1.0 / 3 * d0 + d2 - 1.0 / 6 * d3;
unsigned char a2 = 1.0 / 2 * d0 + 1.0 / 2 * d2;
unsigned char a3 = -1.0 / 6 * d0 - 1.0 / 2 * d2 + 1.0 / 6 * d3;
C[jj] = a0 + a1 * dx + a2 * dx * dx + a3 * dx * dx * dx;
d0 = C[0] - C[1];
d2 = C[2] - C[1];
d3 = C[3] - C[1];
a0 = C[1];
a1 = -1.0 / 3 * d0 + d2 -1.0 / 6 * d3;
a2 = 1.0 / 2 * d0 + 1.0 / 2 * d2;
a3 = -1.0 / 6 * d0 - 1.0 / 2 * d2 + 1.0 / 6 * d3;
out[i * row_stride + j * channels + k] = a0 + a1 * dy + a2 * dy * dy + a3 * dy * dy * dy;
}
}
}
}
return out;
}
Problem: When I use this algorithm to downscale an image, it works except the output image contains all black pixels on the right side for some reason, giving the appearance that it's been "cropped".
Example:
INPUT IMAGE:
OUTPUT IMAGE:
Question: Reviewing the algorithm, I can't see why this would happen. Does anyone see the flaw here?
try not exchanging width and height.
for (int i = 0; i < dest_width; ++i)
{
for (int j = 0; j < dest_height; ++j)
I suggest don't use this function because it was written very bad. You need to make two convolutions: at first by X coordinate then by Y. In this function all these convolutions are making in the same time that leads to very slow work. And if You would look at jj loop body you could notice that all second part of body begining from "d0 = C[0] - C[1];" could be moved outside jj loop because only the last iteration of this loop takes effect on out[] array (all previous iterations results will be overwrited).
You should switch the x and z when you call getpixel, and in getpixel you should index the array using:
[(y * 3 * src_width) + (3 * x) + channel]
In getpixel(in, src_width, src_height, z, x, k):
z mean horizontal offset
x mean vertical offset
So just need patch the getpixel function, below is the patched code:
inline unsigned char getpixel(const std::vector<unsigned char>& in,
std::size_t src_width, std::size_t src_height, unsigned y, unsigned x, int channel)
{
if (x < src_width && y < src_height)
return in[(y * 3 * src_width) + (3 * x) + channel];
return 0;
}
std::vector<unsigned char> bicubicresize(const std::vector<unsigned char>& in,
std::size_t src_width, std::size_t src_height, std::size_t dest_width, std::size_t dest_height)
{
std::vector<unsigned char> out(dest_width * dest_height * 3);
const float tx = float(src_width) / dest_width;
const float ty = float(src_height) / dest_height;
const int channels = 3;
const std::size_t row_stride = dest_width * channels;
unsigned char C[5] = { 0 };
for (int i = 0; i < dest_height; ++i)
{
for (int j = 0; j < dest_width; ++j)
{
const int x = int(tx * j);
const int y = int(ty * i);
const float dx = tx * j - x;
const float dy = ty * i - y;
for (int k = 0; k < 3; ++k)
{
for (int jj = 0; jj < 4; ++jj)
{
const int z = y - 1 + jj;
unsigned char a0 = getpixel(in, src_width, src_height, z, x, k);
unsigned char d0 = getpixel(in, src_width, src_height, z, x - 1, k) - a0;
unsigned char d2 = getpixel(in, src_width, src_height, z, x + 1, k) - a0;
unsigned char d3 = getpixel(in, src_width, src_height, z, x + 2, k) - a0;
unsigned char a1 = -1.0 / 3 * d0 + d2 - 1.0 / 6 * d3;
unsigned char a2 = 1.0 / 2 * d0 + 1.0 / 2 * d2;
unsigned char a3 = -1.0 / 6 * d0 - 1.0 / 2 * d2 + 1.0 / 6 * d3;
C[jj] = a0 + a1 * dx + a2 * dx * dx + a3 * dx * dx * dx;
d0 = C[0] - C[1];
d2 = C[2] - C[1];
d3 = C[3] - C[1];
a0 = C[1];
a1 = -1.0 / 3 * d0 + d2 -1.0 / 6 * d3;
a2 = 1.0 / 2 * d0 + 1.0 / 2 * d2;
a3 = -1.0 / 6 * d0 - 1.0 / 2 * d2 + 1.0 / 6 * d3;
out[i * row_stride + j * channels + k] = a0 + a1 * dy + a2 * dy * dy + a3 * dy * dy * dy;
}
}
}
}
return out;
}
来源：https://stackoverflow.com/questions/15176972/bi-cubic-interpolation-algorithm-for-image-scaling