winscp

I am trying to open file to read from SFTP using WinSCP .NET assembly as par to my exercise to archive file from SFTP to Azure blob. To upload a blob to Azure, I am using using (var fileStream = inputStream) { blockBlob.UploadFromStream(fileStream); blobUri = blockBlob.Uri.ToString(); } How to get the stream from the file on SFTP server? I managed using SftpClient to get the stream using the following code and it works but unfortunately not able to achieve the same using WinSCP .NET assembly. sftpClient.OpenRead(file.FullName) Can anyone help me how to achieve the same using WinSCP .NET

I am able to define the proxy server by using the WinSCP GUI. If I do this I am able to connect to a remote host. But in code I don't find a way to declare the proxy server for WinSCP. In this case I receive Remote server returned an error (407) Proxy authentication required. My code: SessionOptions sessionOptions = new SessionOptions { Protocol = protocol, HostName = hostname, UserName = user, Password = pass, PortNumber = portnumber }; using (Session session = new Session()) { session.ExecutablePath = @"C:\Program Files (x86)\WinSCP\WinSCP.exe"; session.Open(sessionOptions); TransferOptions

1、安装VMWare 1、Centos安装 　　1、系统镜像：centos7 解压完成后变为.iso 　　2、在VM上安装centos7，文件>>新建虚拟机 　　3、 选择典型安装 , 下一步 　　4、 选择 centos 的映像文件，下一步 　　5、设置虚拟机的名字，并设置centos的安装目录 　　6、默认配置，下一步 　　7、 完成后开启此虚拟机 　　 8、选择默认的： test this media & install centos 7, 回车 安装过程不用操作 　　9、选择预言，继续 　　10、点击安装位置 完成，开始安装 设置root密码 重启 输入用户名 root, 回车，再输入密码（注意密码是不可见的），如果密码正确，则进入系统 三. 使用SecureCRT 和 WinSCP 工具 XShell 是远程连接 centos 的工具 WinSCP 是远程连接 centos 的工具，作用实现文件传输作用 secureCRT 是远程连接 centos 的工具 WINSCP 是远程连接 centos 的工具，作用实现文件传输作用 在centos中输入命令ifconfig,查看centos的ip，远程连接使用 进入到修改网络设置的界面 cd /etc/sysconfig/network-scripts/ ，回车，如下图 使用 vi 编辑器编辑该文件， vi ifcfg

I followed instructions here carefully however I haven't get this working right. Here is what I did: Run WinSCP enter Hostname (Elastic IP of my Instance) enter username "ec2-user" enter public key file chose SCP for the protocol Under SCP/Shell settings I chose "sudo su -" Hit Login WinSCP asks me for passphrase key, Hit OK Shows up this error Error skipping startup message. Your shell is probably incompatible with the application (BASH is recommended). NOTE: This works on Putty Jay Sidri WinSCP does not support commands that require terminal emulation or user input. See: http://winscp.net

I need to connect to my virtual box running on my local machine to transfer files from my local system to VM by using WinSCP. How do I find the IP address? When I go to the settings and network tab, there I find something related to IP, but when I use that, it says cannot find or invalid. Login to virtual machine use below command to check ip address. (anyone will work) ifconfig ip addr show If you used NAT for your virtual machine settings(your machine ip will be 10.0.2.15), then you have to use port forwarding to connect to machine. IP address will be 127.0.0.1 If you used bridged networking

I am trying to use WinSCP to transfer files over to a Linux Instance from Windows. Im using private key for my instance to login to Amazon instance using ec2-user. However ec2-user does not have access to write to the Linux instance How do i sudo su - to access the root directory and write to the linux box, using WinSCP or any other file transfer method? Thanks AFAIK you can't do that. What I did at my place of work, is transfer the files to your home ( ~ ) folder (or really any folder that you have full permissions in, i.e chmod 777 or variants) via WinSCP, and then SSH to to your linux

前言： 1，WinSCP：连接到Linux服务器，可以直接查看其文件目录及文件，以及将本机文件放到服务器上去（直接拖到对应目录下就行） 2，XShell：终端模拟器，命令行页面更美观，而且可以直接粘贴命令 正文： 1，WinSCP 官网地址：https://winscp.net/eng/download.php 下载地址：网盘 链接：https://pan.baidu.com/s/13lMkTyTdjE5KdntQpPynoQ 提取码：owoa （1）打开程序，提示登录，即连接服务器 （2）登录成功后 2，XShell 下载地址：网盘 链接：https://pan.baidu.com/s/1HT_BderT1vDqjz03UzgsPg 提取码：htsc （1）打开程序，提示连接 （2）连接成功后 来源： https://www.cnblogs.com/huashengweilong/p/11531286.html

我们在使用服务器或者主机建站的时候肯定 会有需要用到一些软件配合，比如SSH和FTP工具是必不可少的。在之前笔者一直是有使用的XFTP FTP工具，毕竟是和XSHELL是一个商家的，但是从6.0开始确实变得不够好用，免费用户只能同时开启2个服务器链接，如果第三个需要删除前面的2个才可以链接，体验太差。于是准备重新换一个FTP工具使用，这里有看到WINSCP FTP工具是比较好的。 WINSCP FTP软件 目前是免费软件，而且是有支持中文，我们可以使用。 WinSCP下载地址：https://winscp.net/eng/docs/lang:chs 我们一定要从官方下载最新版本。尤其是在管理服务器的软件中，一定不要使用所谓的绿色版，破解版，除非是官方自己推出的。即便以后如果没有免费软件，我们也需要付费购买这类软件，也不能用非官方提供的版本。 我们可以创建FTP账户，在FTP类型中可以选择FTP、SFTP，这两个是我常用的。然后保存之后可以根据我们需要进行链接管理。 我们在链接服务器之后，可以看到服务器端的数据。然后类似我们常用的FTP一样，可以本地和服务器之间传输数据。 WINSCP软件 比XFTP工具好用很多，而且我们也不用担心只能同时链接两台服务器，WINSCP是不限制的，他们一直免费提供。 其他服务器相关软件： 1、 如何下载最新Xshell版本、免费官方正版软件的技巧过程

I have an SSIS package (created in VS 2013) that contains a C# 2012 Script Task. The job of the script task is to download a file from an SFTP server using WinSCP .NET assembly and place it on my server (Windows Server 2012 R2 with SQL Server 2014) My package runs fine when I run it on my Dev machine, but when I deploy to the server my package fails at this task with the error message Exception has been thrown by the target of an invocation I've done some digging and it looks like it has something to do with the reference to WinSCPnet.dll . Quoting WinSCP article on Exception has been thrown