ncurses

Subwindows with ncurses

由 元气小坏坏 提交于 2020-05-27 12:16:16
问题 I'm trying to put a smaller window within the main window using the ncurses library. I'm wanting it to look sort of like the final fantasy battle screen where your main map and character will be on the main window and a subwindow will be at the bottom showing your options for battle. I'm attempting to do it using "WINDOW * subWin = newwin(nlines, ncols, y0, x0);" but when I run it I don't see any secondary window or subwindow. Would anyone know if what I'm using is incorrect or why I'm not

How to display pre-colored string with curses?

由 人走茶凉 提交于 2020-05-27 05:09:41
问题 I'm writing a curses program in Python. I'm a beginner of curses but I've used terminal control sequences for colored output. Now there's some code snippets to print inside the window, I'd like them be syntax highlighted, and it's better done with libraries like pygments, which outputs highlighted code with control sequences. Initially I feed pygments output directly to window.addstr() , but it is turned out that the control sequences is escaped and the whole highlighted string is printed on

How to display pre-colored string with curses?

由 廉价感情. 提交于 2020-05-27 05:08:22
问题 I'm writing a curses program in Python. I'm a beginner of curses but I've used terminal control sequences for colored output. Now there's some code snippets to print inside the window, I'd like them be syntax highlighted, and it's better done with libraries like pygments, which outputs highlighted code with control sequences. Initially I feed pygments output directly to window.addstr() , but it is turned out that the control sequences is escaped and the whole highlighted string is printed on

How to display pre-colored string with curses?

由 廉价感情. 提交于 2020-05-27 05:08:11
问题 I'm writing a curses program in Python. I'm a beginner of curses but I've used terminal control sequences for colored output. Now there's some code snippets to print inside the window, I'd like them be syntax highlighted, and it's better done with libraries like pygments, which outputs highlighted code with control sequences. Initially I feed pygments output directly to window.addstr() , but it is turned out that the control sequences is escaped and the whole highlighted string is printed on

centos6.5+erl19+rabbitmq3.6.14环境搭建

由 血红的双手。 提交于 2020-05-03 17:41:11
这次装Rabbitmq真实一波三折，linux版本 erlang版本以及Rabbitmq的匹配弄的问题层出，写下来希望帮助碰上困难的你。 软件准备： 以下均在centos6.5环境下进行操作： erlang包:otp_src_19.1.tar.gz rabbit包: rabbitmq-server-generic-unix-3.6.14.tar.xz 百度盘提供链接：https://pan.baidu.com/s/1n_1ATH794CQhqkFz7cTY7g 提取码：i3ye 安装erlang： 上传: otp_src_19.1.tar.gz 到/opt 解压: tar -zxvf otp_src_19.1.tar.gz 创建文件夹: mkdir /usr/local/erlang 移动解压的erlang: mv ./otp_src_19.1 /usr/local/erlang erlang需要的环境安装: [root@localhost usr]# yum install ncurses ncurses-base ncurses-devel ncurses-libs ncurses-static ncurses-term ocaml-curses ocaml-curses-devel -y [root@localhost usr]# yum install openssl

Centos系统磁盘目录分析工具-Ncdu

由 孤人 提交于 2020-04-30 12:59:32
Ncdu (NCurses Disk Usage) ：磁盘目录分析工具 平时大家在Centos系统上使用du命令来查看磁盘目录及文件的使用情况，今天分享一款更方便更好用的工具：Ncdu，它是一个基于 Ncurses 库的 du 命令的界面。 ncdu命令是对传统du命令功能上的增强，不需要像du那样输入大量的命令，就可以计算文件及目录大小并可以按照大小或文件名进行排序。 Yum安装： yum -y install epel-release yum -y install ncdu 包名：ncdu-1.14.2-2.el7.x86_64 使用方法： 执行ncdu命令，回车，即可列出当前目录下的文件及目录的大小，默认按照大小进行排序，如图： 常用快捷键： 键盘操作: n — 按文件名排序（升序/降序） s — 按文件大小排序（升序/降序） C – 按项目数排序（升序/降序） d – 删除选定的文件或目录 t — 排序时将目录放在文件前面 g – 以图形方式显示百分比 i – 显示当前文件/目录信息 最后输入q可以退出 来源： oschina 链接： https://my.oschina.net/u/4382640/blog/4259133

Perl + Curses: Expecting a UTF-8 encoded multibyte character from getchar(), but not getting any

由 孤街浪徒 提交于 2020-04-30 06:26:20
问题 I am trying out Bryan Henderson's Perl interface to the ncurses library: Curses For a simple exercise, I try to obtain single characters typed on-screen. This is directly based off the NCURSES Programming HOWTO, with adaptations. When I call the Perl library's getchar() , I expect to receive a character, possibly multibyte (It's a bit more complicated as explained in this part of the library manpage because one has to handle the special cases of function keys and no input, but that's just the

Why do I get “_curses.error: cbreak() returned ERR” when using TensorFlow CLI Debugger?

由 折月煮酒 提交于 2020-04-30 04:25:44
问题 I am trying to use the TensorFlow CLI debugger in order to identify the operation which is causing a NaN during training of a network, but when I try to run the code I get an error: _curses.error: cbreak() returned ERR I'm running the code on an Ubuntu server, which I'm connecting to via SSH, and have tried to follow this tutorial. I have tried using tf.add_check_numerics_ops() , but the layers in the network include while loops so are not compatible. This is the section of code where the

源码安装Mysql5.7

由 我是研究僧i 提交于 2020-04-27 10:19:14
Linux Mysql务器安装 关系型数据库：MySQL、MaraiDB、Oracle、SQL Server、PostgreSQL、DB2 MySQL引擎包括：ISAM、MyISAM、InnoDB、Memory、CSV、BlackHole、Archive、Performance_Schema、Berkeley、Federated、Cluster/NDB Mysql服务器安装YUM/rpm mysql5.7.16-10 yum install mysql-server mysql-devel mysql-libs -y CentOS 6.X版本 yum install mariadb-server mariadb mariadb-libs -y CentOS 7.X版本 Mysql服务器安装源码 http://down1.chinaunix.net/distfiles/mysql-5.5.20.tar.gz wget https://cdn.mysql.com//Downloads/MySQL-5.7/mysql-5.7.25-linux-glibc2.12-x86_64.tar.gz yum install cmake ncurses - devel ncurses -y yum install -y cmake make gcc gcc-c++ libaio ncurses

How to install the ncursesw development libraries

由 蹲街弑〆低调 提交于 2020-04-08 09:04:13
问题 I'm trying to follow the instructions in https://github.com/flok99/multitail/blob/master/INSTALL It says to install the "ncursesw development libraries" How do I do that? 回答1: It depends on your distro: On Debian/Ubuntu, sudo apt-get install libncursesw5-dev On RedHat/Fedora/CentOS, sudo yum install ncurses-devel 来源： https://stackoverflow.com/questions/26186824/how-to-install-the-ncursesw-development-libraries
订阅 ncurses