emulation

问题 friends, i dont see serbain language in android phone language settings.... i am using honeyComb 3.0 and android does have serbain language support in this api. any one guide me what mistake am i doing? and how to change phone language to serbain language? any help would be appreciated. 回答1: Hi well i think want you want to do is here. http://developer.android.com/sdk/android-3.0.html#locs if read at the end says Note: The Android platform may support more locales than are included in the SDK

问题 I was wondering which piece of code is going to run faster since I want to optimize as much as possible. code A: if(((a & 0x0FFF) + (b & 0x0FFF)) & 0x1000 != 0) { Register.setHCarryFlag(true); } else { Register.setHCarryFlag(false); } code B: Register.setHCarryFlag(((a & 0x0FFF) + (b & 0x0FFF))& 0x1000 != 0); The reason I ask is I suspect that code B doesn't branch, but I don't know for sure how each is converted to machine code. Better yet, is there a way to see the machine code that is

问题 I've configured Windows 6 Professional Mobile Emulator, and am trying to get an Internet connection on it. Currently when I browse to any address, I get my local box's IIS, and no outside addresses. On my box: I have Virtual PC 2007 installed. I have, so far, in my Visual Studio .Net app, cradle the device emulator. Allowed connections to DMA (Control Panel/Windows Mobile Device Center/Allow connections to one of the following: DMA) In the Emulator: Settings/Connections/Advanced/Selected

问题 I need to update several thousand X coordinates in BlueZone. I'm using VBA to enter key commands in BlueZone VT. Unfortunately, there is no "set cursor position" command, so I am limited to using "tabs" to put the cursor where it needs to go. At the coordinate updating screen there are two possibilities: 6 or 7 tabs depending on the presence of a 0 or not on the screen. For example: location 241054 has a 1 and needs 7 tabs, location 241051 has a 0 and needs 6 tabs to get to the X location

问题 I need to test my android app 24h day and I have 3 ubuntu boxes to do it. I would like to connect my development system (MOTODEV Studio 1.3) to a Remote Device. Well, the interface ask me about ip for machine and port to connect to. But it doesn't. I found that the adb sever on remote seems not to listen to external ports, only internal loopback, making connections machine-machine impossible. Could it be true? If so, why there is a section on Device to connect to Android Remote Device on

问题 I had the emulator running once and had to remove it because I had to work with virtualBox as you cannot run hyper-v and virtual box together. As I had the emulator running, it means that my system is compatible. I am running windows 10 with i7 processor. The installation process went smooth but when I tried to create a virtual device the process gets stuck at Copying .vhd files and creating virtual machine I tried following the steps shown here Visual studio (2015) emulator for android not

问题 I downloaded the Android source and built version 2.3.7 (for emulator) with the guide in : http://source.android.com/source/building.html It finished with no errors and I got three .img files (about 86 MB total) in the output folder. Then I typed " emulator " command to start an emulator. But the emulator just won't boot up. It was stuck at a black screen with CPU running at 100%. I waited for about 10 mins and it still did not boot up. Does anybody know why? 回答1: I got similar problem as u.

问题 I'm working on azure WorkerRole project in VS2015 , SDK 2.9 . The role works good in cloud, but when i'm trying to run it locally with FullEmulator, role can't be started: [fabric] Role Instance: deployment29(116).MyComp.Engine.Deploy.MyProject.Engine.Azure.0 [fabric] Role state Unknown [fabric] Role state Busy [fabric] Role state Unknown [fabric] Role state Busy [fabric] Role state Unknown [fabric] Role state Busy [fabric] Role state Destroyed [fabric] Role state Busy looks like role is

问题 This is driving me crazy. Like these people, slow-android-emulator, I'm finding running the emulator from eclipse is slow and problematic. As suggested, I've tried running the emulator seperately. But then I don't get my latest changes. I don't know eclipse that well, but I would like something like 'build' and then somehow load the latest image into the emulator. Also, I've tried keeping the emulator open and the continually use run->debug, but after 2 or 3 times, I get errors like the

问题 All the "emulators" I've found via google are simply a skin on top of Safari desktop or use your OS's default browser :( I borrowed my friends iPhone and noticed the CSS for a pure CSS drop-down menu doesn't render properly and you can't click the links, yet it renders properly on Safari desktop and every other browser even Internet Explorer 6 and 7. In other words the site is unnavigable on the iPhone. How can I test the Safari Mobile rendering engine without buying an iPhone? edit: Okay it